Recent content by A Chinese Man

Hopefully seller lied to me and didn't replace the Tokin ; ( I probably won't open it by myself. I shared more info in the following reply, it is related to the temp of CELL. Not intermittent'ness

Thanks for the input I have a Frankie which produce A0901001 if I shut it down when CELL is in low temp, when it's running it's running fine. I'm wondering if I should keep using it until the (presumably) TOKIN really goes bad. More info...

Hi, did you fixed the 3003 error assuming it’s related to CELL?

Here’s one problem, let’s say if the problem can be solved with better capacitors swapped in CELL side. And if I just keep using the console as it is for now (lower CELL temp shutdown leads to A0901001), will it be harmful to CELL?

I think you are referring to netemu, not emu?

Just found this out by accident, is this sth offered by CFW? I thought you can't do that.

I dunno, maybe the seller did..... will it be properly shutdown if the cell temp is higher enough like I said?

I test it, if I turn the console off when CELL is hotter than 70C, it wont beep during the shutdown. Since CELL easily climbs up to 75C before fan speed kicks in (in XMB idle), I guess I'll just stick to the syscon then. Usually fan speed would stay at 28% with CELL being 72C, RSX is mid-50C level.

Me too ;) I have tried to install different 1TB hard drive and the result is same. Blu-ray drive....I have no idea, current one is working with no issue though. Thanks I'll just leave syscon handle it. BTW, I mentioned "one thing I found interesting is that it seems like if I turn the...

Should I worry about Cell degree/heat/thermal or just leave it handled by syscon?

Another question is that could I just leave the 40nm console fan control as syscon? Or maybe I can raise the bar of webman mod a little higher (70C instead of 68C for example) I tested the console with TLoU, fan kicks in when Cell hit 72 degree or so, the highest Cell got was 75 degree, and the...

Could you elaborate why I should pay attention to them? And one thing I found interesting is that it seems like if I turn the console off when Cell is relatively hot (Around 72C), it tends to shut down with no problem.

I think 1002 means it’s RSX Tokin failure? 1001 could mean more than just tokin failure though. How did u get that 40nm CECHA00? I’m curious

Bought a refurbished CECHA00 with 40nm RSX in decent price. It has one problem though, when I turn it off, it beep 3 times and give me A0901001, only when I turn it off, it hasn't shut down by itself yet. In about 1/6 chance it can shut down naturally. should I be worried of it and send the...

Bought a refurbished CECHA00 with 40nm RSX in decent price. It has one problem though, when I turn it off, it beep 3 times and give me A0901001, only when I turn it off, the baby hasn't shut down by itself yet. should I be worried of it and send the console back to seller who offer paid...