Recent content by Alph4_XX

Finally, it works. Bought new Renesas R5F100LLAFB chip (64-pin syscon replacement) and some low melt solder (Sn42Bi57Ag1) from Mouser, soldered with hot gun at low fan speed and 350c, flashed Syscon patched dump (debug ON) with Renesas Flash Programmer (to be converted from bin to s28 file)...

Flashed stock syscon dump, UART logs are identical at the first, long logs, just release is 11.020 obviously, always BLOD with three long beeps. I think i need to use hot gun to the syscon pins and resolder the other SMD capacitor to the VCC pin of the syscon. I have probably soldered badly...

Today i flashed the stock NOR dump with UART flag on: "secure loader build: Nov 27 2023 05:21:22 (r10695:release_branches/release_11.020) [800MHz] AGESA: GL&MO.BDK W9313 ERROR: main(3738) checkUpdVersion 0xffffffff != 0x11020000" fan goes max for like half a second, then three beeps and...

Hi, i tried to downgrade my PS4 Pro from 11.02 to 11.00 (my previous version). Specs: Model CECH-7016B NOR Winbond W25Q256FVEF Syscon A02-COL2 64 pin NVA-001 motherboard I actually made some mistakes, like destroying the first little capacitor near the vcc pin of the syscon (mine is a02-col2)...

Yeah, i did

it does not work to me, i checked everything, tried two computers, three sd cards, no PSP logs from pysweeper. can someone help me? E1004 street model EDIT: Fixed, faulty memory card sd adapter and faulty Mini USB connector, fully working now

Hi, i have an APS-250 power supply from an old PS3 Slim, and i want to use it like bench supply or other uses. If i can remember well, it works perfectly. How can i convert it to a bench supply or something else that is useful? Specs are (theorically): 100-240V 2.7-1.2A 50/60Hz AC 12V 18A DC...

Fully working, one question, if i want to improve translation, can i? If yes how?

FIXED. Thank you all developers! I will check for problems proceeding to install CFW etc...

Send me yours but i theorically did that with pyps3patcher and in lv1ldr something is changed looking at Norinspector in status tab

Removed, i tried to patch with ps3dumpchecker the patch file you sent me but its "3.55 CEX Patched", it is going to work? And ps3dumpchecker does not give any errors applying patch in reversed dump, also rechecking it. Can i PM you my NOR dump? And what's that rvk file? I did what you said to...

Isn't an E3 flasher dump already byte-swapped?

REMOVED

I will send my NOR dump soon but if you can say me about that fsm patches i prefer that

What do you mean with CoreOS with FSM patches? And for tvrk you mean the setting in ps3dumpchecker? Another thing is that in norinspector by mysis it says that both region and target are DEX (bricked dump)