Recent content by birigui

I've never seen this error, not even in my research... perhaps a BGA communication failure between cell and rsx?

I have no further attempts to make other than adding the tantalums and seeing if the symptom changes, I will start adding them 1 by 1. In fact, the sequence that the IC6201 (NCP5318FTR2G) receives from the syscon is different on a working cok002 that I have. I got stuck in the analysis, because...

Good afternoon friend, finally someone with errors 3004. I would like some help if possible, I have a PS3 like this with errors 3004, all voltages and resistances on the board are ok. What you mentioned years ago is responsible for controlling the buck converters that generally supply the...

boa tarde, Tenho um PS3 cecha com erros 1004/3004, todas as voltagens da placa estão ok, exceto a voltagem rsx 1.2v nos nectokins. Verifiquei a página 25 do manual, todos os componentes estão ok, o ic6201 é responsável por liberar os pwms para o ic6202 e ic6203, ele não está liberando, tenho...

Good evening, apparently it was a gpu defect, I took it out to try reballing, but before reballing, I did some tests, and it was shorted, in the measurements before taking it out I didn't find any short, apparently everything was normal, so I didn't proceed with it. the reball. The only thing...

GOOD AFTERNOON, FOLLOW THE ERRLOG: # A0801200 FFFFFFFF # A0012310 FFFFFFFF # A0001004 FFFFFFFF # A0003001 FFFFFFFF # A0003001 FFFFFFFF # A0003001 FFFFFFFF # A0802131 FFFFFFFF # A0802131 FFFFFFFF # A0802130 FFFFFFFF # A0802131 FFFFFFFF # A0802031 FFFFFFFF # A0802131 FFFFFFFF # A0802130 FFFFFFFF...

GOOD MORNING, I HAVE A JSD-001 GLOD PLATE. IT TURNES ON, STAYS ON AND WORKS, BUT WITHOUT VIDEO. CI HDMI DOESN'T HAVE A SHORT, I REMOVED IT TO SEE IF THE VIDEO APPEARS ON THE AV, AND THE VIDEO DOES NOT APPEAR ON THE AV. WHEN TURNED ON, THE HD LED WORKS, THE DUALSHOCK 3 SYNCS TOO. I CAN TURN IT...

Good afternoon Felix, after changing the RSX, as I said, I got errors 2120 x10 and 3013....through measurements I realized that I have a short on the +1.5 RSX VDDIO line and also a low resistance on the FBVDDQ line. I compared it to a photo with the resistors and I have a frank mod made here...

Good afternoon Felix, after changing the RSX, as I said, I got errors 2120 x10 and 3013....through measurements I realized that I have a short on the +1.5 RSX VDDIO line and also a low resistance on the FBVDDQ line. I compared it with a photo with the resistors and I have a frank mod made here...

good afternoon I changed the rsx and fixed the checksums, now I'm getting an errlog with 2120 10x followed by 3013. errlog ofst[56]:err_code:0xffffffff, relógio:0xffffffff ofst[60]:código_err:0xa0202120, relógio:0xffffffff ofst[64]:código_err:0xa0202120, relógio:0xffffffff...

Sua resposta está de acordo com a pergunta. Já encontrei um rsx de 40nm de um kte-001, neste final de semana vou substituí-lo e retorno para informar se tudo ocorreu bem. Your answer is in line with the question. I've already found a 40nm rsx from a kte-001, this weekend I'm going to replace it...

good morning, I found a kte-001 and an mpx-001, these already have their fw 3.65/4.15....my question is, as most of the time the MOD is made on ps3 with ylod, is there any way to check which version it is? current fw of the device? If the answer is yes, is there a tutorial for that? or only...

good afternoon, I managed to connect to the syscon using your YouTube video. The errlog obtained is the same as what I obtained through the GUI, I observed that the sequence of errors is the same 3034/4402 and 10x 2120, as you said this 2120 are false clues, but I saw through ps3devwiki that 10...

This ps3 is a cechc04, tomorrow I'm going to do the pressure test, to see if the device works. when you refer to bumps and not bga what exactly does it mean? Sorry, I use the translator to communicate, maybe I didn't understand.