Recent content by epervier

Hello, I have a ps3 super slim CECH-4304C with motherboard REX-001 which has the fuse F7501 and F7601 blown, unfortunately the references on these can not be seen and I don't have the same motherboard model. I want to know if someboby can give the values of these fuses or if there is a site on...

Hello, I bought a ps3 slim CECH-2004A with 8002F14E error. After disconnection and reconnectind the bd drive cables I've got error 8002F1F9 meanning the wif/bt module is faulty. On this model I can't see the voltage regulator (J7) that can be changed by AMS1117 like on CECH-25xx models. Is...

Hello, I bought a PS3 super slim which displays on av port, when I tried to change to hdmi it shows DVI1 720x480@50Hz with black screen. I tried to reset the display, change the hdmi cables and hdmi ports on the tv, tried another tv and even change the hdmi IC with no success. The hdmi port on...

Hello I bought a ps3 super slim which has no standby light, thinking that the bt/wifi was faulty I removed it with no success. I have seen later that the pin1 (5v) of the connector CN101 and other components (marked with black circle) were connected to ground. I removed these components but the...

Hi, Thanks for your reply and excuse me for asking this question again. I alreday tried this software but as I said it gives core_os_package.pkg I want cosOFW478.bin from ofw 4.78

hello, Is there any software to retrieve coreos bin files from ofw pup ? Puad gui gives pkg file while I need bin files. Thanks

Hello, I bought a PS3 slim model CECH-3004B which goes off by itself after few seconds. After checking the dump, the ROS0 hash is red, I need cosOFW478.bin to patch the dump. Can I use anohter cosOFW ? Thanks

ok thank you

Hi I bought a ps3 slim CECH-3004B which goes off by itself. I made a dump of the NOR and checked it. It is bad with the message "your dump failed on 70 to 137 checks". I want to know if it can be repaired. Thanks

I made a dump of the NOR and checked it, it is OK. I changed the battery which is down, started the ps3 and shut it down. Syscon errlog now gives A0801200, I don't have ylod but glod, can this problem be solved

hi the disk drive ejects but the controller is not connecting and even not charging (the 4 leds are not flashing). Somebody solved the same problem by changing the hdmi encoder, I did the same thing with no success

Hello, I have a PS3 model CECH-2004B which stays on but no video output on both ports. I can't have access to recovery mode too. Syscon errlog gives FFFFFFFF FFFFFFFF at all lines. How can I solve this problem. Thanks

thank you but I think these are not aluminium but tantalum caps, or these ones can be involved ?

Hello, I want to fix the error A0091005 on MPX-001 motherboard, I saw that this can be solved by replacing the 5 silver aluminum polymer caps on the Cell power rail but I don't know which ones exactly. Can somebody send me the picture on these caps ? Thanks

Hello, I am trying to repare a ps3 slim with motherboard DYN-001 which has syscon error A0003001. I need the picture of the 12v main line of this mb so that I can check the components. Thanks