Recent content by Ju084

Hi everyone, i have some news but not very good ones yet:cower: I received my RSX, checked values and looks perfect. I weld it on the board, with temperatures checks, i do not have any shorts anymore, values are correct now, but it still showing instant ylod.... When i power on the motherboard...

Thanks for your help guys, I'm not good enough to do the manipulation of haxxxen. I think i will try to change the rsx. Anyone already order a rsx from Chinese aliexpress? Are they working? I can't find any cxd2982gb anywhere else. Stupid question but is it possible to put another version of rsx?

Thanks for the files, On 90 RSX, after removing it from the board, i use hot gun and a tiny blade to remove the ram. The way it was manufactured and glued to the chip make it almost impossible to replace. Anyway it looks like the failure of rsx come from this underneath ram balls. They melt at...

Yes, i changed thermal paste and delid it last year and it was all good! Max temp in game i see was 72° on rsx and around 70 on cell. I'm looking on internet but i can't find a new rsx CXD2982GB. On another old broken rsx 90nm,i removed the 4 x ram to see if the blue values are still showing...

You are welcome!

Hello, yes i removed RSX. On board i have no more shorts ( where it was showing 0.8 ohms o i have now 98.7 ohms) On RSX, all the values on memory ( blue) are shorted and i have 0.7 ohms on every blue pads and ground. On the board on same points i have a value rising until 8.3 Kohms If i...

Any values and position to check the 4 x 64 Mo ddr on the chip?

Av ic also removed, it was still shorted. I solder back av chip and mosfet..... And i removed RSX.... this is the gpu causing the short. Is it possible to test the rsx, to know if the chip is dead or if a reball can fix it? Also where to find a new RSX 65nm? Snif.....

Mosfet removed, still have the same readings, shorted in same place

Thanks a lot for your contribution, i really appreciate it. I'm at work now and will check this evening. The short cannot come from the hdmi ic because i already removed it ( i changed it 1 year ago because no hdmi signal, and everything worked again after the change. As i suspected in a first...

Here is 0.8 ohms This one is shorted too, i put it on my first message. I have also 0.8 ohms.

On av ic chip i have 1733 ohms ( see my messages on top) On the capacitor of your second question i have 312 ohms

To be sure : - on the first picture it is the av chip - on second picture it is syscon? Correct me if i am wrong!

Ok, i took the following measures: On the 2nd and 3rd pictures i got 0 omhs, but on my other board i have 1844 ohms.

By the way i also have other boards (ylod as well, didn't yet check this ones) and if the problem come from this av chip, can i exchange it with another one from a cechl board?