Recent content by Komotonoto

New update: I noticed that the AV/HDMI chips had some thermal paste in between the pins. I scrubbed the chips using alcohol and a toothbrush and it seems like I am able to get a picture now through the AV port! But sadly the screen showed artifacts/glitches on the screen. I will have to use a...

Update: With HDMI port removed, it seems to have made no difference. I booted into safe mode, but I get the same symptoms, no video, and my ps3 controller cannot sync to the console when plugged into the MOBO. Code notes: I attempted to run bringup/errlog during safemode, but it didnt give out...

Ello, thanks for replying! So I managed to remove the HDMI port, and recorded the resistance/impedance in respect to ground. Pins inside black boxes are shorted to GND (0 ohms) Everything else is OL (open - no connection) Here are photos of HDMI port after port removal (top and bottom...

I actually have a question about that. I did notice some of the pins on the HDMI are shorted to GND, but I don't have another PS3 to compare it with. Are you saying that none of the HDMI pins should be shorted to ground on the PS3 mobo? I looked at the HDMI pinout diagram, but I don't know...

Ello, what is the HDMI IC encoder? Are you saying I should swap out the HDMI IC encoder chip? Or are you saying I should get a HDMI port tester? Thanks.

Hello, I am trying to ressurrect my PS3 slim as well. It has a GLOD after replacing the HDMI port. I will attach 2 separate reports. PS3 MODEL: CECH-2001A Mobo: DYN-001 first code: Microsoft Windows [Version 10.0.19044.6937] (c) Microsoft Corporation. All rights reserved...