Recent content by leonemax81

yes ok now I understand, would it be enough to set it to 1 v.?

I don't understand. If I lowered the VDDc voltage to 0.95 volts, would the Frankie work? Because I make the 0.95 volt adjustment after the job is complete.

Hi guys, I'd like to share my story to see if I'm unique. This situation has happened to me a couple of times and I can't explain it. I have a perfectly working PS3 Slim 25xx, RSX 40Nm, RSX_VDDC measurement of 1.4 Ohm, a low value for a RSX 40Nm. But since the PS3 Slim appears to be working, I...

Hi guys, I have a problem with PS3 toolset, when I click on system manager, it gives me an error, how can I solve it?

I fixed it by performing a clean install of the system using a USB drive in recovery mode.

Hi guys, I need help on a PS3 COK-002. The PS3 turns on and shows a black screen, and after 20 seconds it turns off by itself. I only notice that before turning off the hard disk's orange LED lights up, without giving a YLOD error and without giving a flashing red LED. It turns on and off, the...

I solved it with this PS3; the problem was the MOSFETs powering the CPU. I'm struggling with another PS3 where I followed the entire procedure as usual with the RSX 40Nm. Originally, it had error 2102. Now, after the change, it has instant YLOD, and with errlog, it doesn't show any error codes...

Hi guys I have this 60gb ps3 that just doesn't want to work, errors 3034, 4401, 3003, I have already replaced the capacitors on the CELL side without solution, I attach log, any help is appreciated.

0402

Hi guys I recovered this RSX from a perfectly working PS3 SLIM, the RSX is the CXD5300A1GB model, taking the measurements I noticed that the resistance of the FBVDD RAM is very high compared to the other 40Nm RSX which usually measures around 380Ohm, why is this value so high?

yes thanks, I downloaded webMAN MOD again, and changed the USB stick, it works now, thanks.

error when I try to install webMAN MOD.

It seems like too complicated a procedure for me.

ok, sorry I didn't know about this, but it's not in store FIX anyway.

Hi guys I have a problem with the error 8001003a when I try to install any FIX.pkg, I have no problems with other pkg programs, this error only appears when I install FIX.pkg, I tried all the guides on the net, I enabled the dev_blind option, dev_blind also enabled in Multiman, tried both...