Recent content by Samsensei

1200 is a RSX temp error, 1002 is a RSX Power error which is usally related to NEC TOKEN error. https://www.reddit.com/r/PS3/comments/utek3o/syscon_error_a0801200/ https://www.psdevwiki.com/ps3/Error_Codes#SYSCON_Error_Codes https://www.psdevwiki.com/ps3/Thermal A lot of reading. Also...

No Syscon?

Hi, it is supposed to be a lower-level system hardware error. Related to fans, but as you said, it was running. If i had to guess, it is what is being used instead of the NEC TOKENs but that is not the error you get, so could be due to the damage on the traces, where the NEC was supposed to be...

hi I believe those are all clock errors. Your battery that holds time just needs replacing. The issue is something else. But that would have removed any old issues in the syscon. Maybe add a new one, I believe they are cr2032 battery same as the air tags and try again. See what the issue is...

Hmmm. ok, let us throw some ideas around. https://www.reddit.com/r/PS3/comments/v87la4/high_temps_after_delid_why/ Here is a reddit link to dudes having the same issues as you, see if anything applies in your case. They recommended this, Might come in handy for your case, and i only...

Have you thought about undervolting the ps3? that might be an option, if there was no real change.

Hi everyone, I got a cecha ps3 which the guy said he was about to run over because of the issues he’d had with device after reapplying thermal paste. I tried syscon no Luck was never able to auth in. board is Cok-001. I did put it back together and I did try and test it because the guy said he...

New NEC/TOKENs will work. But keep in mind, that these tokens will eventually expire just sitting on a shelf. That is because these things use silver which will react with air and lose its capacitance over time. you have to figure out how long ago were they manufactured. experiments have been...

that specific model had one of three boards, MPX-001, or MSX-001, or NPX-001. And you can find that info here, https://www.psdevwiki.com/ps3/SKU_Models Then you go here, https://www.psdevwiki.com/ps3/Hardware_flashing#No_shorts For example on this page it says points for MSX-001 have not...

Ok that is a tough situation you are in. And I would take the advise of a pro over mine since I don’t even have all the equipment needed right now to attempt a Frankie like you. But here is what I’m thinking might be the answer. Try and flash the hardware into thinking it is, 3.55...

Hey dude, https://www.psdevwiki.com/ps3/Syscon_Error_Codes Those will show you syscon error codes. 1002 usually means RSX power, which means faulty NEC/TOKEN. This is your board, Both sides have them. These things eventually fail. You need to replace those. The error, 3004 could also be...

Sorry i am new here, and i do not have the tool yet to delid my 65nm and give you resistance values. But here is what i can suggest. Find the board model. https://www.psdevwiki.com/ps3/SKU_Models Once you have that. See if you can find a schematic for that board. That should help you with the...

From what i've seen chisel method seems to be the way. But maybe use a light hand at first so as to not damage the board.

Looking for some advice on a hot air station and thermocouple setup. I do have a bga heater, and want to practice reballing on a dead xbox360. But i wanted to ask for advice on a hot air gun + stand, and thermocouples. Looking for advice on other people's successful setups. Before i purchase...

i did some quicking digging around, and did you probe and check voltages? if not this might help your specific case. https://www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-15 Best of luck and post if this helped or not for the next guy.