Recent content by Test_Guy2010

I've got one of my own CECHC02 (COK-002) Playstations which originally had 22110 errors, was a bad capacitor and blown fuse. After they were replaced the system was working and then put away for some time. Come to today, I pull it out, and yellow light, it looks to have thrown one A0011004...

I would be under the assumption something isn't being powered somehow. When I power it on I do get the fan briefly spin up. I can confirm that 5v reaches the board. CELL resistance is 2.9ohms and does not get power during powerup RSX resistance is 3.1ohms and does not get power during powerup...

So I've got a CECHC02 cok002 that is giving me error 3001 This board has no physical damage and is fairly clean inside Now most posts point to it being a lack of 12v indicating bad supply right? I've tested with a known good supply and changed nothing, I get 3.3v in standby, I get 12v when it...

Hey back again, just after some clarification on an error. Syscon error 1301 or A0401301 would usually indicate a damaged CELL correct? Also would be interesting to set up a database on these error codes similar to the secondary error codes for the Xbox 360 where people can add comments on how...

Hello, sorry yes I got internal and external mixed up, I am only looking to use external mode to just get the error log. I did get a successful authentication (in lowercase "auth"), but no commands would run, however they were in lowercase and had not realised that uppercase must be used in...

Just signed up to get some opinions, so I gave reading the syscon on a ps3 phat a go, however I am not able to extract anything from it (internal mode only without the diag pin, haven't tested external). I have got the data lines correct as I able to auth and get a successful response, however...