nand

I am trying to add CFW to this Phat 80gb CECHE01 but when I checked the flash dump, it says 1 danger 0 warnings: "004.07 metldr Statistics : DANGER! Any bytes from offset 0x840 to offset 0xF120 should be less than 0.52%. 0xBE is 0.54%". There is a thread I found where someone had the same...

Hello everyone. After re-flashing a NOR chip of a Ps3 Fat CECHL01 and fix rsod, is the console banned? Can i log in on psn with my account (after disable syscalls of course)? Some people tell me i will get "re-banned" with the red screen if i do so... Is it true? Thanks!

I was using a PS3 CECHH00 and it stopped booting with YLOD symptoms. But when I checked the errlog in syscon, I found that the CELL was dead. Then I removed the CELL and found that the pattern was stripped. 1. I don't have the eid root key. How can I get the data out? 2. If I can't get the...

A couple of weeks ago I tried to jaibreak my near mint newly acquired backwardscompatible PS3 Phat Console with the dreaded russian BG Toolset.. at the time I didn‘t even know of the fake toolset and didnt think too much of it when it said fw 4.88 instead of 4.89 Long story short, it is bricked...

I was following MrMario2011's guide on jailbreaking a PS3, and when it came time to check the flash dump (NAND, in my case) to make sure there were no dangers or warnings, I get one danger related to vtrm. MrMario2011 did say that reinstalling the OFW may fix dangers and warnings, but after I...

Hi! I have a bricked PS3 phat, but I could make a nand backup with rebug toolbox and also with evilnat 4.88.2 options, but I could not use it with E3 flash to recover the console There`s something that I can do? Maybe convert to E3 flasher format ou any other tool?

I got one dump from some NAND PS3 with it's ERK but I'm unable to decrypt eFlash after extraction. I have tried generate keys in few ways: erk_data=$(xxd -p -u -c 32 -l 32 "eid_root_key.bin") erk_iv=$(xxd -p -u -c 16 -s -16 "eid_root_key.bin") echo...

I want to create a tutorial for eFlash partitions (dev_flash\2\3) mounting on Linux, but unfortunately I don't have PS3 with NAND Flash memory. Could You dump it for me and send me? Dump can be make by i.e Rebug Toolox, MemDump v0.2, BG Toolset and hardware flashers. It can be 236MiB or 256MiB...

It is normal that dumps made by MemDump or Rebug Toolbox are already decrypted? Or there is no any encryption on NAND besides eFlash (I don't have hardware flasher to check it myself)? In case of NAND, where partition table starts? Or where partitions fs tables started? Is this eFlash region...

From OFW 4.85 I installed HFW 4.85.1 and after that I ran the nand dumper since I have a CECHA01. I pressed "initialize exploitation" and I got the success message printed out, but immediately my PS3 shut down and is now blinking with a red light and can't be turned on. It's the yellow light of...

Hey everybody, Im stuck and I cannot seem to find any answers online to this. I have a PS3 CECHE, it had never been jailbroken before. I was in firmware 4.XX (can't remember exactly which one) After I updated to 4.84 HFW I flashed my NAND and the following message appeared: "NAND Flash...

My problem is I have a console that is able to downgrade to 3.20, I just don’t know if my console is NAND or Nor. Is there anyway of checking besides the stickers? There’s 1 sticker on mine and it doesn’t have what the NAND or Nor checker chart says. Any help?

I am currently attempting to jailbreak a CECHA01 on 4.82 OFW. Any dump.hex that gets generated and run against pyps3checker is giving me a warning and two dangers. Below is the excerpt from the log. 006.08 cISD1 Semistatic 2 : DANGER! At offset : 0x508A4 Actual data : 00 99 00 99 01 26 008.07...

DUMP Shared Folder: http://www.mediafire.com/folder/e7rs9wh6w8ohv/mtldr2-dumps i am gathering dumps from currently non-jailbreakable console models only. you can use the dumper tool @ https://**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/ if you would like to post a link to dump, I will add to main shared folder for...

Flow Rebuilder Hi Guys, I'm not offering to patch NAND dumps anymore that original FlowRebuilder couldn't handle. So I've decided to release my modified version of FlowRebuilder that can handle any dump (been too lazy to create a new tool that would do the exact same thing.. ). There's not...

PlayStation 3 NAND Flash Tool Abkarino via playstationhax | Download This tool is a replacement for the famous FlowRebuilder tool for handling PS3 NAND dumps. Why this tool and not others like flowRebuilder? The special thing in my tool that it can handle all NAND dump types even that one...

The older 48TSOP clip is out of production and the new Universal TSOP NAND CLIP is released and i just wanted to try it out, and here is my results. This is the Clip in Question: I wired the Teensy++2.0 to the Clip using COK-002 Motherboard (See the image) The NAND got verified and...

Recent Katsu's News Please note, this is not as esay as one might think. Informations must be verified.

Chapter 02 Hardware Needed for PS3 Downgrade There are two types of PS3 to Downgrade: 1. NAND PS3: These are All Fat PS3 up to CECHG model 2. NOR PS3: These are FAT PS3 from CECHH Model and all Slim Models Up to CECH – 25xx Model. Photo#1 shows all PS3 Model number that can be downgraded...

Basics Quote Source: baileyscream@PSX-Scene Downgrade/Factory-Service-Mode Tools: E3 Flasher (FSM Tool not included) or ProgSkeet (FSM Tool not included) and Teensy ++ USB - For NOR model downgrading. Also for entering FSM. Or use one of these... Other (Clones like PS3Break, Teensy ++ USB...