Recent content by Gus21

I have a PS3 Cechl01 that I bought from an online market, the board appears to be in good condition. I removed the NECs and replaced them with tantalums, the device turns on and stays on the green light but there is no signal on the TV and no activity on the device's HD light. I read the codes...

PS3 Super Slim Motherboard NPX-001 CECH-42xxB Defect: turns on, the green LED lights up, stays on the green light, sometimes it turns off by itself, but most of the time I can't turn it off Can anyone help me? I think it could be CI HDMI ou AV ? >$ AUTH Auth successful Press Ctrl+C to exit...

Hello RIP-Felix, could you modify the Gerber File, removing 2 Castellated holes. Since for me these 2 Castellated holes are not useful, because I don't solder on the board and the PS3 works normally, in addition to reducing the manufacturing cost of the Tantalizer. I have circled in red where I...

Hello RIP-Felix, if the positive solder of one MLCCs comes into contact with the positive solder of a tantalum or two MLCCS as shown in the photo, do the two stop working correctly or did they work normally as they were not connected by the positive? Remembering that in this photo they don't...

Need help Hi everyone, I need help, I bought a PS3 CECHG01 from a local site where I live. On the b side of the pcb I removed the nec tokins from the rsx and put tantalums. The PS3 turns on and works. But when I tried to turn it on other times I noticed the following, something strange happened...

PCBway does it without problems

Hello everyone, I bring information that can contribute to the syscon errorlog, I bought a Cech01 on a local site, when I went to do a visual check on the board, I identified that the cell had several perforation marks, so I went to check the syscon, the codes came 3034 and 4441 I did the delid...

Yes I am using the windows app. Thanks.

Hello everyone, I have a Cecha01 with a syscon 2120 error, does this ps3 have a short hdmi ci? causing the ylod? Thanks. =================================== ERR 00: 00000000 A0213013 FFFFFFFF ERR 01: 00000000 A0202120 FFFFFFFF ERR 02: 00000000 A0202120 FFFFFFFF ERR 03: 00000000 A0202120...

Hello Felix I would like to get this alpha batch, could you share? I'm interested in ordering it for my PS3.

Hello everybody. What is the beginning of an error in the log, is it ERR 00: 00000000 A0403034 FFFFFFFF or ERR 19: 00000000 A0202120 FFFFFFFF? ERR 00 OR ERR 19? -=================================== ERR 00: 00000000 A0403034 FFFFFFFF ERR 01: 00000000 A0403034 FFFFFFFF ERR 02: 00000000...

Hello, with this log of a cechg01 is it possible a frank ? the error A0404401 worries me a lot, can the cell be dead? =================================== ERR 00: 00000000 A0403034 FFFFFFFF ERR 01: 00000000 A0404401 FFFFFFFF ERR 02: 00000000 A0902120 FFFFFFFF ERR 03: 00000000 A0403034 FFFFFFFF...

Hello in models cechl01 and cechk01 is the mod resistor necessary?

Thanks.

I read via syscon from 3 devices 1 cechb01 and 2 cecha01. All with tantalum 470uf 2.5v Will I be able to make the 40nm mod? Cechb01 =================================== ERR 00: 00000000 A0403034 0B489C61 ERR 01: 00000000 A0801200 0B489C47 ERR 02: 00000000 A0403034 0B488B1E ERR 03: 00000000...