Recent content by michelchristian

This console does not work the HDD or the Bluray player, due to the lack of a signal SW_ATA from syscon to enable Q6006 5V HDD and Q6009 5V and 12V BD. So, I made a jumper from the 5V usb to the 5v hdd to test it, the console started but with some artifacts on the initial screen on the PS3 logo...

Hi. I didn't need it, because i replaced the board with another one.

I've just replaced the Rsx with the 40nm and still get the BitTraining BE:RRAC:BX0:BX:BX_STATUS bringup [SSM] state: 0000 -> 0101 Bringup Mode #0 (0xFF) [SSM] ssmCb_OnStartingBePowOn() called. [SSM] First Boot. [SSM] Bringup mode : syspm_stat=00000000/00000000 [POWSEQ] PowerSeq_Setup called...

Unfotunately i dont have another one healthy, just 2 90nm with good readings. I am from Brazil the fastest way to get one is removing from scrap or faulty consoles.

Hello! I had to remove cell and rsx from one board to another, the original board was completely oxidated. So I replaced cell, nands and syscon, but this syscon was patched with 40nm rsx and now i wanted to restore to default 90nm. before change syscon i was getting 0xa0403034...

Unfortunately I have the same problem with 2 consoles, one cecha00 frankie 40nm and cecha01 90nm. I Checked all voltages, replaced the cdx9028gx. Regardless of temperature, ps2 games do not work on both, but i can access the menu and quit from ps2 game. I'm studying more to try to find out if...

Hello! Try to open the two nec tokins of RSX from the upper side of the board without damage, search for burning marks, if you see any remove them and replace with 4 tapol 470uF caps and see if works.

Hello. First, remove all the old solder, clean and then try to use multimeter to test the points.

Hello! I ve done many repairs on ps3 and my second frankie got this error when i bought: 0xa0403034, clock:0xffffffff 0xa0901001, clock:0xffffffff 0xa0302203, clock:0xffffffff 0xa0403034, clock:0xffffffff 0xa0302203, clock:0xffffffff 0xa0403034, clock:0xffffffff 0xa0902120, clock:0xffffffff...

Hello! I have the same issue, but with a different model, my is a CECHA01 that was having problems with heat, but was working normally PS2 games from iso with evilnat 4.90, so after that I delided both Rsx and cell but accidentally scratched the substrate and after that I couldn't play PS2...