Recent content by Samangt

thanks i found out the it was having issues with video output and a hdmi reset fixed it and those 1001s were just because of bad shutdowns

So i got a new cok-002 board and it got a GLOD with these errors in syscon any idea on where the issue might be from or where to start ? thanks >$ AUTH Auth successful Press Ctrl+C to exit >$ eepcsum eepcsum Addr:0x000032fe should be 0x528c Addr:0x000034fe should be 0x7115 sum:0x0100...

Hey guys i tried swapping switch button and psu nothing helped only got to bring it up through uart and it shutsdown after cpu heating up with XDR error as you can see in the codes the board was missing a hdmi encoder and interface which i replaced but nothing changed >$ errlog 00000000 # [SSM]...

Ok thanks for the help i check it out

its a JSD-001 board i tried changing the flex cable and the switch board itself but nothing changed

no beep or sound when i press the switch but it turns on when i connect uart and give the syscon bringup command

no not at all i can only turn it on and off using the uart theres no light and nothing happens when i press the power button and i swapped the psu and also the power button and still no light in standby

Ok ill try that thanks but is the no light on the power button coming from that or theres some power ICs dead as well that i gotta check ?

No I haven’t should i replace all four or reball them ?

Hey guys i just got a ps3 slim that was missing the hdmi and its IC wihich i replaced but since the beginning it didnt have any light or power and i did change the PSU and through Syscon i can turn it on and off but theres no light or action through the power button (i used another slims power...

I need help guys so what can i do with this ps3 its a CECHH06 Fat and everything about it looks clean so any help would be appreciated thanks guys Heres what i retrieved : >$ errlog errlog ofst[108]:err_code:0xffffffff, clock:0xffffffff ofst[112]:err_code:0xa0403034, clock:0xffffffff...

Hey so i just got my first ps3 a fat CECHH06 and it had a issue YLOD so i went through rip felixes video tutorial on syscon and i managed to get CXR to auth and extract the error codes (which are 3034 and 4401 and 4402) so i continued and did the eep and got the 00 for internal access but when i...