Recent content by Statik

How did you go in the end? Update on my error (A0A02124, A0A02024) device, I replaced the HDMI port in addition to the HDMI encoder and I got an image over HDMI briefly. I had to set it to the lowest resolution and enable one by one and I was able to work it up to 1080i (1080p gave no image). I...

here is the extra data from the dump, figured I should just pull it out and post here for review. 013.06 CELL_EXTNOR_AREA 0xFF Filled Area 0 : WARNING! All bytes from offset 0xF69C00 to offset 0xF80000 should be 0xFF. Byte at offset 0xF73000 has value : 0xBD Subsequent bytes in the range...

Trying to check my dump with pychecker and receiving the following warning and danger: "Total number of checks = 155 Number of dangers = 1 Number of warnings = 1 Following check(s) returned a DANGER! 014.05 bootldr 0xFF Filled Area Following check(s) returned a WARNING! 013.06...

I cant edit my other post, sorry for the doublepost. I checked the syscon error codes again and there is nothing new. I've updated the ps3 firmware to the latest version and everything looks fine over AV, still got a black screen when connected to HDMI though.

I replaced the HDMI chip from another DYN-001 board and got the AV multiout to work. but when switching to HDMI, my monitor detects a signal and just gives a black screen. The old HDMI chip had a bunch of shorts to ground, these are gone after replacing with a new one. I should probably poke...

I have a CECH2002A with the same symptoms (powers on fine, responds normally to discs etc. but no video/audio over hdmi or the multi av out) and same error codes. I compared the board to another I have and the hdmi encoder is shorted to ground on a bunch of the pins when compared to another YLOD...