not working

Hello. I have a PS3 Slim CECH3004B. My problem is that loading and ejecting the disc does not work for me. The motor is functional (checked on battery - 3 volts), and so is the tape. There is no short circuit between the plus and minus that goes to the motor (checked with a multimeter on...

Hi, I have a PS2 Fat version SCPH-39001. It currently can only play audio CD's. However it skips as it plays, until it stops completely on the song playing. It then repeats stuttering wherever it stops. PS1 games are recognized in the browser ( has the disk picture ) but when you go into it...

so, i have this slim model 75004 series. it got modchip i am pretty sure. i've done a couple things on it, while iam still new to this modding scene. just opentuna and play some games through smb. i just want to try things, and everything works pretty well until this happened. when it happened...

hi, i bought a fat ps2 over the internet, the seller sent me a video in which it turned on normal and had a screen, recognized controller and memory card but it didn't open the drawer and it was at an attractive price, so I decided to take the risk for the OPL. As it is 110v and where I live it...

Hello. I have a small problem with my PS3. The PS3 is a CECHL04 model. PAL I have been using this playstation for years with rebug firmware. I dont know what version. I have been using it to play ps3 and ps1 games, there has never been any problems with it. Recently, i tried to play an original...

In regards to USBs not working correctly on PS3s, not being detected, showing no files, or otherwise being a pain in the butt to use: Literally joined because after scouring forums helping a buddy customize his PS3 no one seems to have solved this from what I've seen, at least not this glaring...

So I have a PS3 2001A (Slim) And the disc drive has trouble ejecting discs and taking them. So I opened it up and found that the mechanism that pulls in the disc doesn't fully retract. I have tried everything to fix it but nothing works. I have replaced springs losened some screws that where to...

Ok so here's everything I've tried so far and what symptoms I'm getting: I was having MAJOR trouble getting my scph-77001 to read any kind of disc, getting a successful read roughly 1/25-30 tries/boots. Tried adjusting pots in ~25Ω increments, both up and down in regards to the stated factory...

deleted

Hi, after successfully installed HEN 2.3.1, my USB port are not working, PS3 doesn't recognize any USB flash drive. Ive tried the basic stuff (FAT32 format, reboot, tried with other flash drives, flash drives work on PC, etc) Ports are not dirty (it was working right before HEN installation)...