rsx

Hi all! I bought a PS3 Slim CECH 2504a. I’m installed HEN and multiman for watching temperatures. When I played THoU for 1,5 hours I got a CPU: 68°C RSX: 80°C FAN 28%. I’m delided the RSX and changed the thermal paste between lid and RSX die. Played THoU again and I got a CPU:68°C RSX 76°C FAN...

Hi, I wanted to know if there is any OC projects for noBD devices cause I have modefied device that I had to remove the BD from it

I have a YLOD A01 on my hands and went rooting around in the SYSCON to see what's wrong. Did a ton of research, and now I'm pretty much of the mind that the poor thing is done in. Still, this is my first time doing this, so I thought I'd throw up my error log here to see what others say. Only...

one question . ps3 fat may have a higher temperature by cfw or pro mod (rebug rex) because before installing cfw I played 30 minutes and there was no problem. after installing cfw in 5 minutes IN XMB OR GAME it has a temperature of 85 degrees That's why I'm asking because the ps3 turns off at 85...

Is it possible with PS3HEN to obtain PS3 Super Slim hardware info. Such as model numbers / size of RSX etc so there is no need to physically open console? Thanks

What's up, guys? Recently I tried to perform a delid on my PS3 Slim's RSX and, accidentally, I ended up damaging the PCB as you can see in the pictures. Do you think there is a way to weld? NOTE: The console worked normally before the procedure, but now it shows YLOD... https://ibb.co/1LRhkBb...

PoC Release/Project: . Project RSX Boost: Boost your Retail PS3 RSX Speeds. The goal of the project is simple, overclock RSX to achieve some fps boost in games and vsh while maintaining stability in the operating system and games themselves. Currently it comes in two bundles (credits to...

this ps3 is a Super Slim cech 4314c never opened and i never received that message from overheating when i turn it on the rsx its always around 70C and the console feels cool by the touch the cpu temp doesnt go higher than 52C but the rsx can go to 89C

So I messed up my first time attempt at replacing the thermal paste on my RSX. I went in from the wrong side and crushed a few of the capacitors on the chip. Does anyone know just how important these are, is it just a case of swapping them out under a microscope, and if so does anyone have or...

I redid the thermal paste on the CPU and RSX about a year ago, just wondering if my temps are okay. My CPU at idle at the XMB holds at 64C with the fan at 34%, while the RSX is at about 57C, in MGS3 in the MGS HD collection the temps are holding the same, in Motorstorm I get about 64C on CPU and...

Came across an interesting article today which I thought I'd share. It gives a very in-depth explanation of the history and hardware of the PS3. It certainly helped even an idiot like me understand and appreciate the technical achievements the PS3 offered in terms of hardware and the history...

A month ago, i delidded my CECHA00, repasted it, cleaned it and gave it new thermal pads. Its running REBUG 4.82 right now. So after a week of usage, and everything worked fine, it one day didnt start and got GLOD. i have no idea what could be causing it, other than a dead RSX/reball needing...

Hi all This is my first time posting in the forum! As you can likely tell from my title, it's a very common topic, but one I can't seem to find a definitive answer to. I am hoping for a little guidance. I recently bought a refurbished CECHC03 backwards compatible PS3 from a reputable seller...

I bought a week ago a CECHA01 PS3 dated January 2007 and it plays great, for $90 on FB Marketplace. I feel like a kid on Christmas. It sounded like an airplane when turned on. I opened it up to find tons of dust, an excess of white thermal paste, and the grey and power cables in the fan jumped...

Hi all, I recently got curious as to what the best fan might be to put into my console. I saw that a lot of people say the 19 blade fan is the best, while others say the 1.75A Nidec is the best. All while neither side providing any data to back up their claims, so I decided to test every known...

Hello everyone. I have this COK-001 motherboard that was having the GLOD (it booted up just fine but didn't send any output through HDMI). I used the penny trick (I put 4 pennies on top of the IHS of both the CELL and RSX) and screwed the heatsink back in in order to see whether or not the lack...

I bought my ps3 slim (used, 2501a model) from a gameshop last year and this were the temps I was getting with fan speed @ 40%: CPU/RSX: 50-52°c idle. 54-58°C while gaming and 60-61°C on GTA IV (highest temp I got back then). While cleaning my room I unplugged the console and kept it on table so...

So I just got a PS3 right when I got it I cleaned it up and changed the thermal paste then jailbroke it. I have the fan speed configured at 45% manual through webman. On the XMB The RSX would be at 49C-52C and the CPU at 50C-53C. Playing games the RSX would go up to 54C-56C and the CPU 54C-57C...

So I got my hands on a CECHC04 with YLOD, and I tried to fix it with with the tantalum method. I removed the NEC/Tokins, soldered in the tantalums and assembled the console back together. So far so good. I tried to power the PS3 on but it still gave me a YLOD, so I had to further investigate. I...

Hi everyone, I'm Akim ;) I have a DECR-1000A but I have RSX issue "lv2(2): # RSXAuRSX #410-ffffffff [409e]" I try to fix this with "lcnslsrv" but no success... So I want to know if anyone had this kind of problem ? Thank you ;)