temperature

Hi. First post here. I've been reading the forum for the last 3 days and could not come with an answer to my question. So I thought creating a thread would be the best option. I bought a PS3 model CECHB01 and It's in pretty good condition. 93 days of use as SYSCON log says. Not a single error...

Hello everyone! I would like to know if the following temperatures of my PS3 Super Slim (CECH 4311C) are ok... (GTA V) Cell: 70~74 RSX: 69~73 Syscon 35% Fan 50 MINUTES (XMB) CELL: 69 RSX: 67 26% Fan A FEW MINUTES AFTER TURNING ON AND AFTER LEAVING A GAME Where I live the ambient temperature...

Hello, ı recently bought this PS3 slim with CECH-2504B model number (45 nm CELL and 40nm RSX). I’ve already repasted and cleaned out the dust of the system, however temps seem a bit high. Is it normal for this model? It’s sitting idle on XMB for 30 minutes. Room temp is 30°C

Summer is getting hot and i was wondering if there is anything I can do to optimize the cooling on my PS3. The console is running fine, so this is mostly about optimizing, not fixing any real issue. It's a CECH-42 has a 28nm RSX, and it's still running pretty quietly on the syscon preset, but I...

Hi, This might have already been answered on here somewhere but I would like to know for certain if there is a cell / rsx temperature mod for the backwards compatible PS3 models with hardware based PS2 modes (ps2_emu.self / ps2_gxemu.self). I know such a thing exists for the software based...

i have a cechc04 with webman, i have both cpu and rsx at 55° celsius. i know it being too hot can possibly damage them overtime but can something go wrong overtime with having lower than the "recommended" temperatures? just curious.

do i still need to use the webman fan setting or can i use syscon fan on a frankie i have other a01 and e01 models with the 90nm with nec tokins i use webman max 68c 35% to 32% fan they are all Delidded they run fine but fan can still be lil annoying but now put away for display now since...

Dear PSX Place Community, I have completely cleaned my PS3 Slim, replaced thermal paste etc. Unfortunately, nothing has changed in the CPU temperature. Even while playing or after, the temperature of the CPU is 74-75°C, RSX is okay. Before cleaning idle temperatures: CPU 74°C RSX 65°C After...

Hi all! I bought a PS3 Slim CECH 2504a. I’m installed HEN and multiman for watching temperatures. When I played THoU for 1,5 hours I got a CPU: 68°C RSX: 80°C FAN 28%. I’m delided the RSX and changed the thermal paste between lid and RSX die. Played THoU again and I got a CPU:68°C RSX 76°C FAN...

There is this myth about the PSX having overheating issues floating around the internet. However, I highly doubt that's actually true. My DESR-7700 only measures around ~30 - 32 °C after playing through the first part (about 20-30 minutes) of Final Fantasy X when measured using PS2Temps shortly...

I redid the thermal paste on the CPU and RSX about a year ago, just wondering if my temps are okay. My CPU at idle at the XMB holds at 64C with the fan at 34%, while the RSX is at about 57C, in MGS3 in the MGS HD collection the temps are holding the same, in Motorstorm I get about 64C on CPU and...

The model is cech 2501a I changed the thermal paste and it only had an effect on the RSX, but the cpu continues to heat up to the point where the webman uses 70% of the fan to try to keep the temperature at 64 degrees. I also replaced the thermal pads with new ones as the old ones were worn...

Hi all This is my first time posting in the forum! As you can likely tell from my title, it's a very common topic, but one I can't seem to find a definitive answer to. I am hoping for a little guidance. I recently bought a refurbished CECHC03 backwards compatible PS3 from a reputable seller...

Hello, after I tried some PKG-PS2 games on my HEN PS3 Super Slim, I found that I can't see the temperature through Webman by pressing the START+SELECT to display it. On ISO PS3 games it works with no issue and I want to be sure that my PS3 has safe temperatures while playing PS2 games. So, is...

First time posting here, been lurking for roughly a year. Love the forum and the community around it. A year ago I got a 2nd hand CECH-C03 to play PS1/PS2/PS3 games on. As soon as I got it I cleaned it out, reapplied thermal paste and replaced the thermal pads. It lasted me several months but...

Hi all, I recently got curious as to what the best fan might be to put into my console. I saw that a lot of people say the 19 blade fan is the best, while others say the 1.75A Nidec is the best. All while neither side providing any data to back up their claims, so I decided to test every known...

I bought my ps3 slim (used, 2501a model) from a gameshop last year and this were the temps I was getting with fan speed @ 40%: CPU/RSX: 50-52°c idle. 54-58°C while gaming and 60-61°C on GTA IV (highest temp I got back then). While cleaning my room I unplugged the console and kept it on table so...

Hello friends, I'm currently investigating which of all PS3 Slimline models are running the lowest possible temperatures, because some people claim those models have different temps, which I could say might be true for the 2000 series and the 3000 due to resized cell/rsx size, but unsure about...

----- PS4 Temperature by Lapy Know the temperature of the PS4's APU, and configure the min °C or °F at which the fan should start... All credits to: @LightningMods_ @notzecoxao @_AlAzif @Zer0xFF via notzecoxoa@Twiter: @Lapy05575948's latest release: PS4 Temperature 1.0 Features: Shows...

Hope it is the right forum for this cause it part of Rebug CFW I thought its placed good in here. NOW I got 4.84 Rebug REX with 8.1 Cobra. BUT I got any other firmware for testing purposes back in the days I guess it was some 4.82 and it shows the CELL and RSX temp in PS Menu while playing ps2...