PS3 4.81.1 REBUG REX / D-REX + COBRA v7.31 (w/ Rebug Toolbox v02.02.11)

Is it necessary to optimize fan settings and temperature after launching psnpatch? And if it is then is it possible from rebug toolbox?
Thank you [emoji16]

Sent from my vivo Y51L using Tapatalk
 
pain111 said:
Is it necessary to optimize fan settings and temperature after launching psnpatch? And if it is then is it possible from rebug toolbox?
Thank you [emoji16]

Sent from my vivo Y51L using Tapatalk
Click to expand...
No. The Rebug Toolbox does not deal with the fan.
When you launch psnpatch, wMM switches to PS2 Emulator fan settings. It's a manual setting.
Go to the wMM setup page.
Go to the temps section & input the value you want to apply during psnpatch sessions.
Don't forget to save the settings.
Start with 40%, check your temps when you play & tweak the value according to the temperature of the CPU.
 
AriLK said:
So how would I go about doing this? Would I update via Storage Media, in the System Update settings on the XMB?
Click to expand...
XMB->Settings->System Update->Update via storage device.
Use a fat32 USB key.
The path of the update file on your USB key should be
X:\PS3\UPDATE\PS3UPDAT.PUP in caps letters.
Don't forget to remove any disc from the BD drive & disconnect Internet to make sure you don't lose jailbreak by accident.
 
btw, if u need help decrypting and encrypting the sprx, let us know. it's pretty easy to do. decryption is obvious. just -d . encryption is:

Code: 
scetool –verbose --template game_ext_plugin.sprx --sce-type=SELF --skip-sections=FALSE --compress-data=TRUE --encrypt game_ext_plugin.prx game_ext_plugin.sprx
 
Hello again
i tested Rebug Cex and Dex
i have the same issue with PSN on cex, as i told you before @bguerville
about Dex, it's working so good so far till now
about cex, the problem comes after i use SEN Enabler or psnpatch
it show me error when trying to connect on PSN :
An error has occurred. you've been signed out from the ps network, bad request

this only happen on CEX after using SEN Enabler or psnpatch
on DEX, using only psnpatch, everything goes fine.

and i confirm:
- multiman working good with cex / dex
- irisman stealth version working only on cex
- SEN Enabler doesn't support 4.81 dex yet

Thank you so much
 
I'm having some issues, even after updating again from recovery mode...
Game mounting is very unresponsive, taking a while to perform. After the game is mounted, it automatically tries to run, but fails (Game Quit: No request event)
Settings are: System Mode Rebug. XMB Operation Retail; Debug Menu CEX QA; XMB CFW settings enabled; Cobra Enabled; Webman Enabled
Any ideas guys?

EDIT: Nevermind... Out of 170 games, chose one that seems to be broken (Assasins Creed 2 GOTY). The odds...
 
Last edited:
Cinhomartins said:
I'm having some issues, even after updating again from recovery mode...
Game mounting is very unresponsive, taking a while to perform. After the game is mounted, it automatically tries to run, but fails (Game Quit: No request event)
Settings are: System Mode Rebug. XMB Operation Retail; Debug Menu CEX QA; XMB CFW settings enabled; Cobra Enabled; Webman Enabled
Any ideas guys?

EDIT: Nevermind... Out of 170 games, chose one that seems to be broken (Assasins Creed 2 GOTY). The odds...
Click to expand...

Only 170 games.... walks away crying...
 
Cinhomartins said:
I'm having some issues, even after updating again from recovery mode...
Game mounting is very unresponsive, taking a while to perform. After the game is mounted, it automatically tries to run, but fails (Game Quit: No request event)
Settings are: System Mode Rebug. XMB Operation Retail; Debug Menu CEX QA; XMB CFW settings enabled; Cobra Enabled; Webman Enabled
Any ideas guys?

EDIT: Nevermind... Out of 170 games, chose one that seems to be broken (Assasins Creed 2 GOTY). The odds...
Click to expand...
I understand that you don't really have a problem but thought I would let you know about the following...

Game Quit: No request event is a normal message with all Rebug CFW when quitting a game or homebrew!
It's not an error!

If a game tries to launch automatically after mounting, there is either the auto play feature or maybe you are using the tag in the game folder name, iso name etc...

Your version of AC2 GOTY is either badly named using a tag or there is something wrong with the iso or JB folder.
This game should always work fine, I have a copy myself that works fine.
Before reporting a general error, you should always try if the problem affects more than one game!

Finally, you should avoid using recovery mode to install a as CFW as only the XMB update is guaranteed to always work with Rebug CFW....
 
bguerville said:
I understand that you don't really have a problem but thought I would let you know about the following...

Game Quit: No request event is a normal message with all Rebug CFW when quitting a game or homebrew!
It's not an error!

If a game tries to launch automatically after mounting, there is either the auto play feature or maybe you are using the tag in the game folder name, iso name etc...

Your version of AC2 GOTY is either badly named using a tag or there is something wrong with the iso or JB folder.
This game should always work fine, I have a copy myself that works fine.
Before reporting a general error, you should always try if the problem affects more than one game!

Finally, you should avoid using recovery mode to install a as CFW as only the XMB update is guaranteed to always work with Rebug CFW....
Click to expand...

Thank you very much for the info. I'll look into the auto play option... All my files are ISO named like this: [NAME OF THE GAME] - CODE OF THE GAME. Is that correct for naming... also... what is a tag?
Thanks again mate
 
pinky said:
btw, if u need help decrypting and encrypting the sprx, let us know. it's pretty easy to do. decryption is obvious. just -d . encryption is:

Code: 
scetool –verbose --template game_ext_plugin.sprx --sce-type=SELF --skip-sections=FALSE --compress-data=TRUE --encrypt game_ext_plugin.prx game_ext_plugin.sprx
Click to expand...
Would it be possible to create the pkg file for this gameboot?
 
Cinhomartins said:
Thank you very much for the info. I'll look into the auto play option... All my files are ISO named like this: [NAME OF THE GAME] - CODE OF THE GAME. Is that correct for naming... also... what is a tag?
Thanks again mate
Click to expand...
Any name will do for the iso, just use the name as you want it to appear in the webMAN-MOD game list...

The tag is a word you insert in the iso file name or the folder to indicate that you want the game to start automatically if mounted without using the auto play feature.
You need to add this string of characters to the file or folder name:
Code: 
[auto]
 
bguerville said:
Any name will do for the iso, just use the name as you want it to appear in the webMAN-MOD game list...

The tag is a word you insert in the iso file name or the folder to indicate that you want the game to start automatically if mounted without using the auto play feature.
You need to add this string of characters to the file or folder name:
Code: 
[auto]
Click to expand...

Thank you kindly!
 
You must log in or register to reply here.

Similar threads

Back
Top