Broken av jack kte-001

N

Ntrider1991

Member
I'm looking for some one that could possibly find the schematic or give me close up pictures of the av jack I have been searching for awhile I have found other boards just not my model, as my ps3 slim 3001b kte-001 is missing the av jack from a fall not by me and that fall knocked off 2 chips next to the jack I have ordered the jack replacement however I can't find what components I need to solder back on next to the jack. PS3 turned on green light just no video output on hdmi I assume because of missing av jack and 2 components one component has 6 legs the other looks like 8 legs they are very small. Any help is appreciated.
 
Hi. I got one Slim 3000 that needs new WiFi chip replaced. I've currently put it together for test but will be messing with it in the next few days. Mark the area or missing chips you would like photo taken on some example picture. I will try to take the close ups for you.
 
Here is picture next to av jack not hdmi that's the optical audio next to it
f3dff56b76f5875fab43cc922321a86d.jpg
a7ab6494c767f05be67f927ba20591bf.jpg


Sent from my SM-N976V using Tapatalk
 
The elwment missing in between is the same as other two. I don't know what are those either. The second missing one has no informations I could read, nor by magnifying glass or phone camera.
 

Attachments

  • IMG_20210426_145006.jpg
    IMG_20210426_145006.jpg
    2 MB · Views: 799
Thank you thats more than i could find online

Sent from my SM-G998U1 using Tapatalk

Were able to get your wifi chip replaced ? If you have never done it before get you a hot air station and check the temp is correct and use pletny of flux and kapton tape its heat resistant tape should protect surronding components ive found about 725° F work good for most things you may need 800°F if it has any big traces going to it they leach the heat. I have been using amtech flux in a syringe.

Sent from my SM-G998U1 using Tapatalk
 
Last edited by a moderator:
Ntrider1991 said:
Thank you thats more than i could find online

Sent from my SM-G998U1 using Tapatalk

Were able to get your wifi chip replaced ? If you have never done it before get you a hot air station and check the temp is correct and use pletny of flux and kapton tape its heat resistant tape should protect surronding components ive found about 725° F work good for most things you may need 800°F if it has any big traces going to it they leach the heat. I have been using amtech flux in a syringe.

Sent from my SM-G998U1 using Tapatalk
Click to expand...
Oh hi, I forgot about this topic for a while, sorry.

I tried to transplate Wi-Fi board from one Slim 2500 to another, but didn't succeed.
Successfully desoldered board from one console, but ripped trace off the working module from second console :|

I don't know if PS3 will turn on without Wi-Fi module soldered, but after all the hassle, I got told that it's been in repair shop before and then I saw flux residue around southbridge... It was probably dead on arrival and I was wasting time on corpses...
I tried to transplate just the Wi-Fi chip and voltage regulator from Slim 2500 to Slim 3000 but it didn't worked either. Maybe I fried it while soldering, or it's incompatible between different Slim models, I don't know.

Buying new module for Slim 3000 will not be profitable, but at least I still can use these consoles for spare parts in future.

And did you succeed to repair the AV connector? :)
 
You must log in or register to reply here.

Similar threads

Back
Top