CECHM03 HAS 90NM RSX

[Timbo9876]

So below are the codes I found on the "M" revision console. Seeing the 1701 with the 14FF code wasn't good news. However, I tested the console and ran TLOU for over 3 hours on Syscon fan with no errors. The console didn't have its original warranty seal but looked unopened with dried out white stock paste on the RSX and CPU IHS. After doing an RSX de-lid, I found to my surprise a 90nm RSX. In the "M" revision, it's meant to be a 65nm chip. I have seen this before in an "M" revision, which I posted on here some time ago.

After a CPU and RSX de-lid, I used to stars 922 thermal plaster and RTV Hi temp gasket silicone sealant to attach the CPU and RSX IHS back onto MB. The overheating CPU is now fixed, and the RSX isn't going above 65 degrees. Liquid metal was used to obtain the best possible results. Is it possible Sony fixed the console and installed a 90nm RSX to resolve the 1701 14FF errors?

Any thoughts would be most appreciated. Below is the SM log


Firmware Version: 4.90 (build 50747)
Platform ID: CokD10
Product Code: 00 87
Product Sub Code: 00 06
Hardware Config: 4E00FFFF0007BCBF
Syscon Fimware Version: 0E69.0001000400040002 (EEPROM: 0001000400040002)

Bringup Count: 3300, Shutdown Count: 3211
Runtime: 106 Days, 21 Hours, 43 Minutes, 11 Seconds

Error Log
01: A0802022 Thu May 18 13:40:45 2023
02: A0802022 Thu May 18 13:30:36 2023
03: A0801001 Wed Sep 5 00:43:00 2018
04: A0801002 Wed Apr 11 15:54:04 2018
05: A0801001 Wed Apr 11 15:53:16 2018
06: A0801001 Sun Dec 10 16:53:36 2017
07: A0801001 Thu Feb 23 19:17:36 2017
08: A0801001 Sat Oct 29 18:52:49 2016
09: A08014FF Sat Oct 29 18:52:49 2016
10: A0801001 Fri Jul 8 19:22:26 2016
11: A08014FF Fri Jul 8 19:22:26 2016
12: A0801001 Wed Apr 6 20:28:06 2016
13: A08014FF Wed Apr 6 20:28:06 2016
14: A0801001 Fri Apr 1 00:02:05 2016
15: A0801701 Fri Apr 1 00:02:05 2016
16: A0801002 Fri Aug 21 01:40:57 2015
17: A0801001 Thu Aug 20 23:25:31 2015
18: A0801001 Thu Aug 20 15:49:51 2015
19: A08014FF Thu Aug 20 15:49:51 2015
20: A0801001 Thu Aug 20 12:13:03 2015
21: A08014FF Thu Aug 20 12:13:03 2015
22: A0801001 Tue Aug 18 22:55:29 2015
23: A0801701 Tue Aug 18 22:55:29 2015
24: A0801001 Fri Aug 14 16:12:23 2015
25: A0801701 Fri Aug 14 16:12:23 2015
26: A0801001 Fri Aug 7 19:02:29 2015
27: A0801701 Fri Aug 7 19:02:29 2015
28: A0801001 Thu Mar 26 17:27:58 2015
29: A0801001 Mon Mar 2 20:37:45 2015
30: A08014FF Mon Mar 2 20:37:45 2015
31: A0801701 Mon Mar 2 20:37:45 2015
32: FFFFFFFF Fri Feb 27 20:28:39 2015


Sent from my SM-F936B using Tapatalk

 

[daft]

Notice the log says platform ID CokD10, which points to the DIA-001 motherboard. This in turn was the CECHHxx's board, which featured a 90nm RSX.

My guess is the shell you are using was originally for a CECHMxx console, but for whatever reason ended up being used as a donor for your system, which seems to actually be a CECHHxx. In which case the 90nm RSX checks out.

 

[Timbo9876]

That seems to be the answer. I'm still struggling to see what the 1701 followed by the 1001 code means?

Sent from my SM-F936B using Tapatalk