I was able to connect my DexDrive to Windows 7 a good while back via a serial/usb cable. Now when I do the same thing on windows 10, it tells me that it can't be found in Dexter. Am I missing a step? Is there a better way to read them? I have the PS3->USB MC reader as well. Thanks for the help.
PS1 Connecting DexDrive to Win10 machine
- Thread starter kruuth
- Start date
Berion
Developer
Could You check IsoBuster? It have support for PSX and PS2 memory card structures but if any of those devices will be seen is mystery. After You install it, go to settings and check all devices (Communication > Find and list [check everything]). I don't have PS3MCA, nor DexDrive to test it.
You should see something like this below. Choosing device or partition is under arrow in top left field.
For USB You need drivers to tell Windows what to do with device. For PS3 Memory Card Adaptor (original only!) there was made some for FMCB (You can find them in AIO Project).
For RS232, LPT and GamePort no drivers needed.
You should see something like this below. Choosing device or partition is under arrow in top left field.
For USB You need drivers to tell Windows what to do with device. For PS3 Memory Card Adaptor (original only!) there was made some for FMCB (You can find them in AIO Project).
For RS232, LPT and GamePort no drivers needed.
GuilloteTesla
Moderator
First, check if Windows 10 can indeed comunicate with your DexDrive.
Here are some simple tutorials that use a handy tool to check serial port comunication:
Hope that helps you to get a diagnose at least.
Here are some simple tutorials that use a handy tool to check serial port comunication:
Hope that helps you to get a diagnose at least.
