Hi all, picked up a DECHA00A that beeps three times and blinks red when the power cord in inserted.
It's been opened up before and the points for TX/RX/DIAG had been soldered to before and internal syscon mode had been enabled.
Getting the errorlog shows code 0001214 which I can't seem to find any info on.
Is this a lost cause?
Fixed. Turned out to be the thermal sensor IC for the Southbridge which if memory serves is IC3101
It's been opened up before and the points for TX/RX/DIAG had been soldered to before and internal syscon mode had been enabled.
Getting the errorlog shows code 0001214 which I can't seem to find any info on.
Is this a lost cause?
Fixed. Turned out to be the thermal sensor IC for the Southbridge which if memory serves is IC3101
Last edited by a moderator:
