E3 flasher guide

[Tahoe08]

hello guys i wanna see if someone can help me flash my nor backup i made a while back with multiman its d norbin file backup.. i bricked my cech2001a trying d 4.82 exploit.. i hav d e3 flasher limited and its time to take it out of d wrapper its nevr been used! I hav gone as far as opening d ps3 and soldering d tristate to a ground and hav connected d e3 flasher but im a bit confused on d dumping and flashing in terms of what switches to leave down and up when doing either process.. i heard and seen sum say when dumping to put 1and3 up and rest down and sum say to just leave 3 up snd d rest down to dump. And to flash sum say 1 up and rest down and others say all down to flash... can sumone give me sum input...

 

[Turranius]

If its brand new, you'll perhaps want to flash the E3 flasher itself first. Otherwise it will only work for that console in the future.

https://stevenbreuls.com/2014/01/e3-nor-flasher-multiple-ps3-consoles-samsung-firmware/

After that, to dump, it should be D-D-U-D-D-D (down, down, up, down, down, down)
Move the file from the SD card after each dump to the machine and do a few dumps.

Once you've verified your dump and patched it, put it on the SD card and make sure its called bkpps3.bin
To write it back to the PS3, its U-D-D-D-D-D (up, down, down, down, down, down)