PS3 [ERROR]: 0xa0092113

[Lkylon]

Any help with the error below please? Is it a fan problem?

Getting this error code:

[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0301
[SSM] PowSeq Fail : Detected !
[SSM] state: 0301 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0092113

Error log also says:

errlog
ofst[ 92]:err_code:0xffffffff, clock:0x0b488bb4 2005/12/31 00:22:12
ofst[ 96]:err_code:0xa0902020, clock:0x0b488bb4 2005/12/31 00:22:12
ofst[100]:err_code:0xa0404421, clock:0x0b488bc2 2005/12/31 00:22:26
ofst[104]:err_code:0xa0403034, clock:0x0b488bc2 2005/12/31 00:22:26
ofst[108]:err_code:0xa0902120, clock:0x0b488bc2 2005/12/31 00:22:26
ofst[112]:err_code:0xa0404421, clock:0x0b488bf2 2005/12/31 00:23:14
ofst[116]:err_code:0xa0403034, clock:0x0b488bf2 2005/12/31 00:23:14
ofst[120]:err_code:0xa0404421, clock:0x0b488c0a 2005/12/31 00:23:38
ofst[124]:err_code:0xa0403034, clock:0x0b488c0a 2005/12/31 00:23:38
ofst[ 0]:err_code:0xa0902020, clock:0x0b488c0a 2005/12/31 00:23:38
ofst[ 4]:err_code:0xa0404421, clock:0x0b488eb5 2005/12/31 00:35:01
ofst[ 8]:err_code:0xa0403034, clock:0x0b488eb5 2005/12/31 00:35:01
ofst[ 12]:err_code:0xa0404421, clock:0x0b488ebf 2005/12/31 00:35:11
ofst[ 16]:err_code:0xa0403034, clock:0x0b488ebf 2005/12/31 00:35:11
ofst[ 20]:err_code:0xa0404421, clock:0x0b488ec9 2005/12/31 00:35:21
ofst[ 24]:err_code:0xa0403034, clock:0x0b488ec9 2005/12/31 00:35:21
ofst[ 28]:err_code:0xa0902120, clock:0x0b488ec9 2005/12/31 00:35:21
ofst[ 32]:err_code:0xa0404421, clock:0x0b48a93a 2005/12/31 02:28:10
ofst[ 36]:err_code:0xa0403034, clock:0x0b48a93a 2005/12/31 02:28:10
ofst[ 40]:err_code:0xa0902120, clock:0x0b48a93a 2005/12/31 02:28:10
ofst[ 44]:err_code:0xa0404421, clock:0x0b48a945 2005/12/31 02:28:21
ofst[ 48]:err_code:0xa0403034, clock:0x0b48a945 2005/12/31 02:28:21
ofst[ 52]:err_code:0xa0404421, clock:0x0eeccfba 2007/12/08 03:44:58
ofst[ 56]:err_code:0xa0403034, clock:0x0eeccfba 2007/12/08 03:44:58
ofst[ 60]:err_code:0xa0404421, clock:0x0eecd05c 2007/12/08 03:47:40
ofst[ 64]:err_code:0xa0403034, clock:0x0eecd05c 2007/12/08 03:47:40
ofst[ 68]:err_code:0xa0404421, clock:0x0eecd0b0 2007/12/08 03:49:04
ofst[ 72]:err_code:0xa0403034, clock:0x0eecd0b0 2007/12/08 03:49:04
ofst[ 76]:err_code:0xa0404421, clock:0x11a22466 2009/05/17 01:27:02
ofst[ 80]:err_code:0xa0403034, clock:0x11a22466 2009/05/17 01:27:02
ofst[ 84]:err_code:0xa0404421, clock:0xffffffff
ofst[ 88]:err_code:0xa0403034, clock:0xffffffff
[mullion]$
Bringup : 1624 times
Shutdown: 1282 times
Power-on: 154day 08hour 04min 48sec

 

[Esoterias17]

What board is? Fat or Slim? 3034 is related to an Bad rsx conection whit the cell

 

[Lkylon]

What board is? Fat or Slim? 3034 is related to an Bad rsx conection whit the cell

Fat - DIA -001

What do you mean by bad connection? Does it need to be re-flowed? Re-balled??

 

[Esoterias17]

Yes reballing but DIA-001 is an 90nm rsx, bad gpu They have the bumpgate problem, even if you do reballing at some point it dies again. Ideally, you should change to a 40nm RSX, but it is a colossal job.

reballing is what to do!