Hi everyone! I just got a new CECHA PS3 and it doesn't detect any Wifi. I've done some research and it seems related to the not well documented issue present at this video:
Could a CFW-based solution be developed to address this issue?
I understand that it is related to older PS3 Wi-Fi hardware, but would a software-level workaround be feasible — for example, forcing the PS3 to ignore certain Wi-Fi signals or channels during scanning?
The interference seems to affect the Ethernet port too. A simpler workaround could be letting users manually disable the Wi-Fi module, since many people with this same issue reported that unplugging the antenna made everything work again.
Hi, like the title Say My ps4 fat not beep no power, i was reading the nor chip to enable uart, allí fine dumps ok read and write good, now y had 2.6v coming from southbridge pin 7 when the normal voltage is 3.3v any help if posible
Could a CFW-based solution be developed to address this issue?
I understand that it is related to older PS3 Wi-Fi hardware, but would a software-level workaround be feasible — for example, forcing the PS3 to ignore certain Wi-Fi signals or channels during scanning?
The interference seems to affect the Ethernet port too. A simpler workaround could be letting users manually disable the Wi-Fi module, since many people with this same issue reported that unplugging the antenna made everything work again.
Hi, like the title Say My ps4 fat not beep no power, i was reading the nor chip to enable uart, allí fine dumps ok read and write good, now y had 2.6v coming from southbridge pin 7 when the normal voltage is 3.3v any help if posible
Last edited by a moderator:
