PS3 FERROX 4.70 Standard CEX CFW by Alexander

Following the recent official firmware update of 4.70 for the PlayStation 3, CFW developer Alexander has released 4.70 FERROX v1.00 CFW (Standard CEX). This firmware comes with the usual CFW patches and feature we grown accustom to with the release of a Standard CEX. There has been a number of models and things tested view the release notes for additional details and information and as with any CFW release if you do not have a Hardware Flasher it's best to wait several days before installation and always USE AT YOUR RISK [break]ss[/break]

​

GOOGLE TRANSLATED:

MANDATORY:
[It is recommended that, after a successful installation of custom firmware, run:
​

• 
  [*=center]Restore File System (Recovery)
  [*=center]Rebuild Database (Recovery)

So, you will have a clean installation, and you'll be fine.
(Thanks to franci97 & SonyForever)

It requires installation by RECOVERY MODE

WARNING: If you want to use PSNpatch 4.66.xx, you have to remove all sorts of Spoof, worth softbreak
​

FERROX 4.70 CFW Features

• 
  [*=1] Built on an OFW 4.70
  
  [*=1] Disabled the CoreOS and control ECDSA
  [*=1] LV1: patched to remove protection LV2
  [*=1] LV1: patched CoreOS Hash Check (prevents brick consoles downgradate not dehashed)
  [*=1] LV1: Peek & Poke
  [*=1] LV2: Peek & Poke
  [*=1] Compatibility PS2 Games
  [*=1] Compatibility PSP Remastered
  [*=1] Compatibility PSP Minis
  [*=1] Key 4.70 (start games with keys 4.70 EBOOT / sprx)
  [*=1] PSN / SEN Enabled.
  [*=1] RSOD Screen Bypass for consoles suffering from RSOD
  [*=1] BT Remote PS3 patch
  [*=1] PS3 BluRay DISC patch
  [*=1] Compatibility with the latest version of REACTPSN
  [*=1] App_home / PS3_GAME *
  [*=1] Install Package Files *
  [*=1] Ability to Downgrade from OFW 3:55 with QA activated.
  [*=1] Upgradable from any CFW's
  [*=1] Support XMB InGame ScreenShot Feature
  [*=1] Support Remote Play Feature
  [*=1] Stability as nell'OFW 4.70
  [*=1] Ability to downgrade from any custom firmware with QA activated.

FERROX 4.70 was tested on these PS3 Models:

• 
  [*=1] CECH 2004A - Tested and Working. (Thanks Mizio)
  [*=1] CECH 2004b - Tested and Working. (Thanks Mizio)
  [*=1] CECHG04 - Tested and Working.
  [*=1] CECHL-01A - Tested and Working.
  [*=1] CECH-2501 - Tested and Working.
  [*=1] CECH 2504A - Tested and Working.
  [*=1] CECHC-04 - Tested and Working.
  [*=1] CECHL04 - Tested and Working

TESTED HOMEBREW:

• 
  [*=1]CECHL04 IRISMAN v3.44 (Works)
  [*=1]CECHL04 PSNpatch v4.66.40 (Works)

PS3 Games Test with IRISMAN v3.44:

• 
  [*=1] DEAD OR ALIVE 5 (Works with IrisMan 3.44)
  [*=1] FAR CRY 4 (Works with IrisMan 3.44)
  [*=1] Kingdom Hearts Remix 2.5 (Works with IrisMan 3.44)

INSTRUCTIONS PRIOR TO UPDATE ANY CFW
Disable any spoof (to avoid brick)
Remove any disc from the player GOCO (to avoid updating an OFW)

Are the basics, but it is always better to remember them!
​

Downloads & Mirrors: Link
MD5: 9750324E94C8FE80607013CAD637080B
Size: 195.5 MB (205,233,390 bytes)
Source: OpenModding.net

---

In this link you can view all the latest 4.70 CFW and Homebrew Updates for 4.70
​

As with with any CFW Installation, USE AT YOUR OWN RISK
​

 

[MENTION=56]Alexander[/MENTION]

How many patches did you apply to your lv2kernel?

I just compared mine and yours, and yours have a lot of patches.

 

works with both two manager now, thanks Ax. !

 

[MENTION=56]Alexander[/MENTION]

How many patches did you apply to your lv2kernel?

I just compared mine and yours, and yours have a lot of patches.

If I remember correctly I have applied in 4.70, 8/9 patches for 40/45 patterns
You, as you have applied?

 

If I remember correctly I have applied in 4.70, 8/9 patches for 40/45 patterns
You, as you have applied?

No, I do not apply any patches except for peek/poke as managers can do patches which [MENTION=89]aldostools[/MENTION] @deank prefer since patches can be changed in future.

If so, some old patches can conflict with new patches due to its asm functions overlapping each other

 

No, I do not apply any patches except for peek/poke as managers can do patches which [MENTION=89]aldostools[/MENTION] @deank prefer since patches can be changed in future.

If so, some old patches can conflict with new patches due to its asm functions overlapping each other

Yes, it is correct as you do. It also saves a lot .... very ..... time.
As long as the Ferrox is stable is not a problem.

 

im pretty new to irishman and ive installed the one you suggested Alexander.. but when i press on a game and the ps3 reboots... then theres nowhere i can see the selected game mounted as BD or antyhing... cant find where to start the game

 

im pretty new to irishman and ive installed the one you suggested Alexander.. but when i press on a game and the ps3 reboots... then theres nowhere i can see the selected game mounted as BD or antyhing... cant find where to start the game

is your ps3 doing an complete reboot? or just going back to the xmb menu? normally theres a folder in your xmb "app_home/ps3_game" where you can find your mounted game.

 

Thx Alexander

Forrex 4.70 working fine with IRISMAN 3.45 ( Some Games Like COD:Black OPS 2 + BF4 ) with PSNPATCH 4.66.40 for ONLINE

COD:Ghost black screen

thx alexander i call play online again

 

im pretty new to irishman and ive installed the one you suggested Alexander.. but when i press on a game and the ps3 reboots... then theres nowhere i can see the selected game mounted as BD or antyhing... cant find where to start the game

after installing the CFW've tried:
Restore File System (Recovery)
Rebuild Database (Recovery) ?

It seems strange that the PS3 will reboot after mounting a game

 

im pretty new to irishman and ive installed the one you suggested Alexander.. but when i press on a game and the ps3 reboots... then theres nowhere i can see the selected game mounted as BD or antyhing... cant find where to start the game

Maybe is not reboot, just quit to xmb? Try what Alexander said and/or check game is mounted under /app_home/PS3_GAME/ in xmb. If nothing help try diffrent payload setting in irisman, etc. If game is iso, you need mamba payload selected because this cfw is non-cobra.

 

im pretty new to irishman and ive installed the one you suggested Alexander.. but when i press on a game and the ps3 reboots... then theres nowhere i can see the selected game mounted as BD or antyhing... cant find where to start the game

That happened to me,what to do is go to the game in irisman and press triangle then go to config game and do these settings
Requires disc..no
Direct boot..no
Extebootbin..off
Bdemu..off
Ext/dev..off
Hope this helps,i have gta v playing with these settings.And a big thanks to you Alexander,great work mate,now waiting for NoBd version as this ps3 keeps cutting out(near ylod).

 

Thanks TAM MC

just what i needed , it works like a charm

 

[MENTION=56]Alexander[/MENTION]
great work. thanX

 

im on ofw 4.66 it wont let me update to the ferrox 4.70, it keep saying corrupted file do it have to update my game too ofw 4.70 then install the cfw 4.70 ?

 

um you have to unplug console plug keyboard in boot pse and time it right with thebfollowing combo.
up up down down left left right right b a start and should jailbreaK ps3

 

im on ofw 4.66 it wont let me update to the ferrox 4.70, it keep saying corrupted file do it have to update my game too ofw 4.70 then install the cfw 4.70 ?

Cant install CFW on OFW 4.70 . CFW can only install on 3.55 OFW.. So you need to downgrade your console (if you have a downgradable model)

This thread/app may be of help for you: link

um you have to unplug console plug keyboard in boot pse and time it right with thebfollowing combo.
up up down down left left right right b a start and should jailbreaK ps3

Please be serious or not answer at all. (Thanks)

 

great work !

 

Anyone an information about a new mulitman that works on ferrox 4.70?

 

Anyone an information about a new mulitman that works on ferrox 4.70?

I wouldn't be surprised if @deank waits until right before Rebug and Habib releases. Usually how it works.

 

Multiman work on any 4.70 cobra (mmcm mode). For standard cfw you need to wait probably like playerkp420 said. Or ask deank to do it faster.