PS3-HW Hardware Questions/Issues? - Post Syscon Logs/details here

[CynicalShadow]

Please Help, I have a PS3 CECH-3001A that turns on for a second and then shuts off, was told the console was dropped and it has drop damage to the case with a crack in the case corner where the power button is, motherboard looks okay, found rust on outer edge around the motherboard ground but I cleaned it up along with rust on the metal shielding. Seeking information about I should be searching out for the error codes I have below, Thanks.

>$ auth
Auth successful
Press Ctrl+C to exit
>$ r 800 8
00000000
# +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
# -----------------------------------------------
# 14 9B 12 8A 03 24 BA 43

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.

Press Ctrl+C to exit
>$
F0000003
# [PowSeq] Error:9103
# [SSM] PS3 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ ERRLOG GET 00
00000000 A0403034 311321AF
Press Ctrl+C to exit
>$ ERRLOG GET 01
00000000 A0404002 311321AE
Press Ctrl+C to exit
>$ ERRLOG GET 02
00000000 A0403034 3113031D
Press Ctrl+C to exit
>$ ERRLOG GET 03
00000000 A0404002 3113031C
Press Ctrl+C to exit
>$ ERRLOG GET 04
00000000 A0403034 311302DF
Press Ctrl+C to exit
>$ ERRLOG GET 05
00000000 A0404002 311302DF
Press Ctrl+C to exit
>$ ERRLOG GET 06
00000000 A0403034 3112FFEF
Press Ctrl+C to exit
>$ ERRLOG GET 07
00000000 A0404002 3112FFEF
Press Ctrl+C to exit
>$ ERRLOG GET 08
00000000 A0403034 3109C9EB
Press Ctrl+C to exit
>$ ERRLOG GET 09
00000000 A0404432 3109C9EA
Press Ctrl+C to exit
>$ ERRLOG GET 0A
00000000 A0403034 3109C9DF
Press Ctrl+C to exit
>$ ERRLOG GET 0B
00000000 A0404432 3109C9DF
Press Ctrl+C to exit
>$ ERRLOG GET 0C
00000000 A0403034 31098B35
Press Ctrl+C to exit
>$ ERRLOG GET 0D
00000000 A0404401 31098B35
Press Ctrl+C to exit
>$ ERRLOG GET 0E
00000000 A0403034 31098B2A
Press Ctrl+C to exit
>$ ERRLOG GET 0F
00000000 A0404441 31098B2A
Press Ctrl+C to exit
>$ ERRLOG GET 10
00000000 A0403034 31098B1C
Press Ctrl+C to exit
>$ ERRLOG GET 11
00000000 A0404401 31098B1C
Press Ctrl+C to exit
>$ ERRLOG GET 12
00000000 A0403034 3032D1AC
Press Ctrl+C to exit
>$ ERRLOG GET 13
00000000 A0404401 3032D1AB
Press Ctrl+C to exit
>$ ERRLOG GET 14
00000000 A0403034 2F4BC660
Press Ctrl+C to exit
>$ ERRLOG GET 15
00000000 A0404402 2F4BC660
Press Ctrl+C to exit
>$ ERRLOG GET 16
00000000 A0403034 2F4BC5E5
Press Ctrl+C to exit
>$ ERRLOG GET 17
00000000 A0404402 2F4BC5E5
Press Ctrl+C to exit
>$ ERRLOG GET 18
00000000 A0403034 2F4BC5B1
Press Ctrl+C to exit
>$ ERRLOG GET 19
00000000 A0404402 2F4BC5B0
Press Ctrl+C to exit
>$ ERRLOG GET 1A
00000000 A0403034 2F4BC5A0
Press Ctrl+C to exit
>$ ERRLOG GET 1B
00000000 A0404402 2F4BC5A0
Press Ctrl+C to exit
>$ ERRLOG GET 1C
00000000 A0403034 2F4BC583
Press Ctrl+C to exit
>$ ERRLOG GET 1D
00000000 A0404403 2F4BC582
Press Ctrl+C to exit
>$ ERRLOG GET 1E
00000000 A0403034 2F4BC553
Press Ctrl+C to exit
>$ ERRLOG GET 1F
00000000 FFFFFFFF FFFFFFFF

 

[FantasticSpr]

Hello, i have a CECHL04 PS3 with YLOD. In the syscon log, you can see that it's all errors 1002 and 2124. I'm aware they likely mean that the NEC Tokin are to be replaced. However, i'm worried that there might be an issue with the RSX chip.

The console turns on with a YLOD after about 5 seconds initially. Then, after minutes of continously trying to turn it on and getting for a few seconds a video signal (and then having it abruptly shutdown with YLOD. This behaviour is inconsistent, sometimes it YLOD's very quickly, sometimes it's stable for around 10 to 15 seconds), it eventually becomes stable enough that i can get to ps3toolset. Below are the syscon error logs. Thank you in advance for your advice and help.

 

[Michael Lovvorn]

Syscon Error Causes

Hello everyone I have 2 PS3 Phat models that are throwing codes and I would like to ask for some help and see if I can fix either of them or if it is even worth trying to save them. Any ideas and or comments will be appreciated. thank you in advance. I have a CECH G Model and a CECH L Model. The error codes on the G Model are 3034 and 4002, the codes on the L model are 2024, 2124, and 1002.

 

[Afritada]

Hello everybody. Newbie here, first time posting something like this. This is the right forum to post errlogs, yes?

Anyways these are the errlogs I have. I own a CECHL04 PS3.

>$ auth
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth successful
Press Ctrl+C to exit
>$ errlog get 00
00000000 A0092114 0EB9AB5C
Press Ctrl+C to exit
>$ errlog get 01
00000000 A0091002 0EB9AB5B
Press Ctrl+C to exit
>$ errlog get 02
00000000 A0093004 0EB9AB3B
Press Ctrl+C to exit
>$ errlog get 03
00000000 A0092114 0EB9AAF7
Press Ctrl+C to exit
>$ ERRLOG GET 01
00000000 A0091002 0EB9AB5B
Press Ctrl+C to exit
>$ ERRLOG GET 02
00000000 A0093004 0EB9AB3B
Press Ctrl+C to exit
>$ ERRLOG GET 03
00000000 A0092114 0EB9AAF7
Press Ctrl+C to exit
>$ ERRLOG GET 04
00000000 A0091002 0EB9AAF7
Press Ctrl+C to exit
>$ ERRLOG GET 05
00000000 A0092114 0CF91487
Press Ctrl+C to exit
>$ ERRLOG GET 06
00000000 A0091002 0CF91486
Press Ctrl+C to exit
>$ ERRLOG GET 07
00000000 A0092113 0CF913A0
Press Ctrl+C to exit
>$ ERRLOG GET 08
00000000 A0091002 0CF9139F
Press Ctrl+C to exit
>$ ERRLOG GET 09
00000000 A0092114 0CF91386
Press Ctrl+C to exit
>$ ERRLOG GET 0A
00000000 A0091002 0CF91386
Press Ctrl+C to exit
>$ ERRLOG GET 0B
00000000 A0802124 0B7C4666
Press Ctrl+C to exit
>$ ERRLOG GET 0C
00000000 A0802124 0B7C4665
Press Ctrl+C to exit
>$ ERRLOG GET 0D
00000000 A0801002 0B7C4665
Press Ctrl+C to exit
>$ ERRLOG GET 0E
00000000 A0802024 0B7C42D0
Press Ctrl+C to exit
>$ ERRLOG GET 0F
00000000 A0802124 0B7C42D0
Press Ctrl+C to exit
>$ ERRLOG GET 10
00000000 A0802124 0B7C42CF
Press Ctrl+C to exit
>$ ERRLOG GET 11
00000000 A0802124 0B7C42CF
Press Ctrl+C to exit
>$ ERRLOG GET 12
00000000 A0802124 0B7C42CE
Press Ctrl+C to exit
>$ ERRLOG GET 13
00000000 A0801002 0B7C42CE
Press Ctrl+C to exit
>$ ERRLOG GET 14
00000000 A0802124 0B7C42A1
Press Ctrl+C to exit
>$ ERRLOG GET 15
00000000 A0801002 0B7C42A1
Press Ctrl+C to exit
>$ ERRLOG GET 16
00000000 A0802124 0B7C4272
Press Ctrl+C to exit
>$ ERRLOG GET 17
00000000 A0801002 0B7C4271
Press Ctrl+C to exit
>$ ERRLOG GET 18
00000000 A0802124 0B7C4262
Press Ctrl+C to exit
>$ ERRLOG GET 19
00000000 A0802124 0B7C4261
Press Ctrl+C to exit
>$ ERRLOG GET 1A
00000000 A0801002 0B7C4261
Press Ctrl+C to exit
>$ ERRLOG GET 1B
00000000 A0802124 0B7C4173
Press Ctrl+C to exit
>$ ERRLOG GET 1C
00000000 A0802124 0B7C4172
Press Ctrl+C to exit
>$ ERRLOG GET 1D
00000000 A0801002 0B7C4172
Press Ctrl+C to exit
>$ ERRLOG GET 1E
00000000 A0802124 0B7C413D
Press Ctrl+C to exit
>$ ERRLOG GET 1E
00000000 A0802124 0B7C413D
Press Ctrl+C to exit
>$ becount
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ help
00000000
# B_AUTH "AUTH1"
# B_AUTH "AUTH2"
# ANY    "AUTHVER"
# A_AUTH "BOOT"
# A_AUTH "BOOTENABLE"
# A_AUTH "CID"
# A_AUTH "CSAREA"
# A_AUTH "DISABLEALLERASE"
# A_AUTH "ECID"
# A_AUTH "EEP"
# ANY    "ERRLOG"
# A_AUTH "HALT"
# A_AUTH "KSV"
# INT    "LS"
# A_AUTH "PDAREA"
# A_AUTH "R16"
# A_AUTH "R32"
# A_AUTH "R8"
# A_AUTH "REV"
# ANY    "SETCMDLONG"
# A_AUTH "SPU"
# ANY    "VER"
# A_AUTH "VID"
# A_AUTH "W16"
# A_AUTH "W32"
# A_AUTH "W8"
# A_AUTH "bestat"
# A_AUTH "bringup"
# INT    "buzz"
# INT    "buzzduty"
# INT    "cleareep"
# INT    "commt"
# A_AUTH "csum"
# A_AUTH "devpm"
# A_AUTH "duty"
# A_AUTH "eepcsum"
# A_AUTH "ejectsw"
# ANY    "errlog"
# A_AUTH "extend"
# A_AUTH "fanconmode"
# A_AUTH "fanconpolicy"
# A_AUTH "fantbl"
# INT    "getrtc"
# A_AUTH "hdmi"
# A_AUTH "help"
# INT    "hversion"
# A_AUTH "hyst"
# INT    "meminfo"
# A_AUTH "nonfatalerror"
# A_AUTH "patchinfo"
# INT    "poll"
# A_AUTH "portscan"
# INT    "portset"
# A_AUTH "powerstate"
# A_AUTH "powersw"
# A_AUTH "powupcause"
# A_AUTH "r"
# A_AUTH "r16"
# A_AUTH "r32"
# A_AUTH "r64"
# A_AUTH "r64d"
# INT    "rbe"
# INT    "recv"
# ANY    "revision"
# INT    "send"
# ANY    "setcmdlong"
# A_AUTH "shutdown"
# A_AUTH "syspowdown"
# INT    "task"
# A_AUTH "thrm"
# A_AUTH "tmp"
# A_AUTH "trp"
# A_AUTH "tsensor"
# A_AUTH "tshutdown"
# A_AUTH "tzone"
# ANY    "version"
# A_AUTH "w"
# A_AUTH "w16"
# A_AUTH "w32"
# A_AUTH "w64"
# A_AUTH "wbe"

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] Msg 2663 : being delayed.
# [PowSeq] Error:8301
# [SSM] PS0 ng.
# [SSM] Cond/Fatal received, msg=2663.
# [SSM] Fataldown Start.

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] Msg 2663 : being delayed.
# [PowSeq] Error:8303
# [SSM] PS0 ng.
# [SSM] Cond/Fatal received, msg=2663.
# [SSM] Fataldown Start.

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$

It started shutting down one day playing Heart of Darkness...then it slowly YLODed. I suspect it overheated but I cleaned the dust out of it and applied new pastes a few months before the symptoms.


According to ps3devwiki I have bad NEC/Tokins but I want to make sure your advice on this. Are these errlogs enough? Do I need to input more codes?

Your advice is much appreciated. Thank you to the PSX community for helping to keep old PS consoles alive

 

[parker]

ps3 CECHL01 SYSCON codes not working. when i run errlog all it gives me is FFFFFFF. Here is code of me booting it up, shuting it down, then running errlog.

>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 2.5.0
#!(Build ID: 3318,35708,
#!Build Date: 2008-10-11_00:31:58)
#!
#!Copyright(C) 2008 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Cond/Fatal received, msg=2649.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF

Press Ctrl+C to exit
>$

 

[HappyPotato]

Howdy Ya'll! I'm trying to help out a friend and I'm in need of some guidance. I have A PS3 Fat CECHE COK-002 that is stuck in an update loop on 4.92 OFW. The system had been sitting for approximately 3 years unused. The system was powered on after that time and the user did an online firmware update to 4.92. Everything went as planned and the system booted normally. When the user tried to use discs in the system it would lag at the home screen like it was trying to read discs. The user tried to reinstall 4.92 in safe mode from a flash drive and now it's stuck in an eternal update loop. The syscon logs look clean from what I see other than me force powering down the system and at one point getting annoyed and unplugging the system. The SB logs show It's a problem reading the BR drive, but I'm not convinced that the BR drive is the issue. I tried a known good working drive out of a CECHA along with the ribbon cable and the system returns the same SB logs. I replaced the battery. On a whim i also swapped in the PSU from the CECHA but get the same error. I monitored the voltage at the drive during the update and 12v and 5v seem to be stable. At this point i'm wondering if it's something on the board or maybe the board needs a recap or something. Any help is appreciated. Thanks!

00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801004 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801004 FFFFFFFF
00000000 A0801004 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 A0801001 FFFFFFFF
00000000 FFFFFFFF FFFFFFFF

errlog
ofst[ 44]:err_code:0xffffffff, clock:0xffffffff
ofst[ 48]:err_code:0xa0801001, clock:0xffffffff
ofst[ 52]:err_code:0xa0801001, clock:0xffffffff
ofst[ 56]:err_code:0xa0801004, clock:0xffffffff
ofst[ 60]:err_code:0xa0801004, clock:0xffffffff
ofst[ 64]:err_code:0xa0801001, clock:0xffffffff
ofst[ 68]:err_code:0xa0801001, clock:0xffffffff
ofst[ 72]:err_code:0xa0801001, clock:0xffffffff
ofst[ 76]:err_code:0xa0801001, clock:0xffffffff
ofst[ 80]:err_code:0xa0801001, clock:0xffffffff
ofst[ 84]:err_code:0xa0801001, clock:0xffffffff
ofst[ 88]:err_code:0xa0801001, clock:0xffffffff
ofst[ 92]:err_code:0xa0801001, clock:0xffffffff
ofst[ 96]:err_code:0xa0801001, clock:0xffffffff
ofst[100]:err_code:0xa0801001, clock:0xffffffff
ofst[104]:err_code:0xa0801001, clock:0xffffffff
ofst[108]:err_code:0xa0801001, clock:0xffffffff
ofst[112]:err_code:0xa0801001, clock:0xffffffff
ofst[116]:err_code:0xa0801001, clock:0xffffffff
ofst[120]:err_code:0xa0801001, clock:0xffffffff
ofst[124]:err_code:0xa0801001, clock:0xffffffff
ofst[  0]:err_code:0xa0801001, clock:0xffffffff
ofst[  4]:err_code:0xa0801001, clock:0xffffffff
ofst[  8]:err_code:0xa0801001, clock:0xffffffff
ofst[ 12]:err_code:0xa0801001, clock:0xffffffff
ofst[ 16]:err_code:0xa0801004, clock:0xffffffff
ofst[ 20]:err_code:0xa0801001, clock:0xffffffff
ofst[ 24]:err_code:0xa0801001, clock:0xffffffff
ofst[ 28]:err_code:0xa0801001, clock:0xffffffff
ofst[ 32]:err_code:0xa0801001, clock:0xffffffff
ofst[ 36]:err_code:0xa0801001, clock:0xffffffff
ofst[ 40]:err_code:0xa0801001, clock:0xffffffff

becount
Bringup : 2758 times
Shutdown: 2676 times
Power-on: 139day 02hour 39min 58sec

bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] First Boot.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x21e2
shutdown
Do nothing. (PowerOff State)

update_manager::update_package_bottomhalf start processing
bd_updater::detect_drive_type()
bd_updater::inquiry
inquiry cmd(ret = 0, result_code = 0x0)
0x05() 0x80(▒) 0x00() 0x23(#) 0x9b(▒) 0x00() 0x00() 0x00()
0x53(S) 0x4f(O) 0x4e(N) 0x49(I) 0x20( ) 0x20( ) 0x20( ) 0x20( )
0x50(P) 0x43(C) 0x2d(-) 0x43(C) 0x59(Y) 0x43(C) 0x54(T) 0x45(E)
0x4d(M) 0x20( ) 0x20( ) 0x20( ) 0x33(3) 0x20( ) 0x32(2) 0x42(B)
0x34(4) 0x21(!) 0x36(6) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( )
0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( )
0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( ) 0x20( )
0x00() 0x00() 0x00() 0x00()
bd_updater::inquiry: ret = 0, result_code 0x0
bd_updater::detect_drive_type() = 0x0
bd_updater::detect_drive_generation()
        test_cmd::send_atp_command
        test_cmd::send_atp_command returned
bd_update::detect_drive_generation:
        page_code = 0x2f, major = 0x1, minor = 0x0, gen = 0x100
bd_updater::detect_need_eject(): type = 0, revision = 0, need_eject = true
bd_update::detect_drive_type(): generation = 0x100, revision = 0
bd.detect_drive_type() : ret = 0, type = 0x0
BD Drive type is not 302R/304R/306R/308R/310R/312R/314R/316R/318R on CEX. fatal error

 

[BillD]

I acquired a CECHA01 with YLOD. Someone had recently done a delid. I cleaned it up to look at the RSX for damage. Looks good but I'm just learning so maybe I missed something.



Internal Session with several bringups as I didn't see an error code on first try.

>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] First Boot.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
Press Ctrl+C to exit
>$ powerstate
[SSM] state: 0104 -> 0204
[SSM] state: 0204 -> 0105
[SSM] state: 0105 -> 0400
(PowerOn State)
[SERV NVS] READ CMD

Boot Loader SE Version 1.0.0 (Build ID: 1673,16934, Build Data: 2006-10-30_12:39:57)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV THERM] NOTIFY_MODE CMD
powerstate
ATA Power          : ON
PCI Power          : OFF
RSX Power          : ON
XDR Power          : ON
Eurus Power        : ON
SB Power           : ON
RSX Thermal Sensor : AVAILABLE
BE Thermal Sensor  : AVAILABLE
[mullion]$ [SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
Press Ctrl+C to exit
>$ shutdown
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
shutdown
[SSM] state: 0400 -> 0500
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode ... req_wake_src = 000000F4, ctxt=00/00
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0500 -> 0000
(PowerOff State)
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
[POWERSEQ] Error : BitTraining RSX:RRAC:BX0:BX:FLEXIO_ID
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0403034
Press Ctrl+C to exit
>$ powerstate
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)
powerstate
ATA Power          : OFF
PCI Power          : OFF
RSX Power          : OFF
XDR Power          : OFF
Eurus Power        : OFF
SB Power           : OFF
RSX Thermal Sensor : UNAVAILABLE
BE Thermal Sensor  : UNAVAILABLE
[mullion]$
Press Ctrl+C to exit
>$ errlog
errlog
ofst[ 20]:err_code:0xffffffff, clock:0x0b4887cb  2005/12/31 00:05:31
ofst[ 24]:err_code:0xa0403034, clock:0x0b4887cf  2005/12/31 00:05:35
ofst[ 28]:err_code:0xa0902120, clock:0x0b4887cf  2005/12/31 00:05:35
ofst[ 32]:err_code:0xa0403034, clock:0x0b4887d4  2005/12/31 00:05:40
ofst[ 36]:err_code:0xa0403034, clock:0x0b4887dc  2005/12/31 00:05:48
ofst[ 40]:err_code:0xa0902120, clock:0x0b4887dc  2005/12/31 00:05:48
ofst[ 44]:err_code:0xa0403034, clock:0x0b4887de  2005/12/31 00:05:50
ofst[ 48]:err_code:0xa0902120, clock:0x0b4887de  2005/12/31 00:05:50
ofst[ 52]:err_code:0xa0403034, clock:0x0b4887e2  2005/12/31 00:05:54
ofst[ 56]:err_code:0xa0403034, clock:0x0b4887e6  2005/12/31 00:05:58
ofst[ 60]:err_code:0xa0403034, clock:0x0b4887ea  2005/12/31 00:06:02
ofst[ 64]:err_code:0xa0902120, clock:0x0b4887ea  2005/12/31 00:06:02
ofst[ 68]:err_code:0xa0403034, clock:0x0b4887ef  2005/12/31 00:06:07
ofst[ 72]:err_code:0xa0902120, clock:0x0b4887ef  2005/12/31 00:06:07
ofst[ 76]:err_code:0xa0403034, clock:0x0b5abc4c  2006/01/13 19:30:20
ofst[ 80]:err_code:0xa0403034, clock:0x0b729316  2006/01/31 21:28:54
ofst[ 84]:err_code:0xa0403034, clock:0x0b729324  2006/01/31 21:29:08
ofst[ 88]:err_code:0xa0902120, clock:0x0b729324  2006/01/31 21:29:08
ofst[ 92]:err_code:0xa0403034, clock:0x0b72933a  2006/01/31 21:29:30
ofst[ 96]:err_code:0xa0902120, clock:0x0b72933a  2006/01/31 21:29:30
ofst[100]:err_code:0xa0403034, clock:0x0b729350  2006/01/31 21:29:52
ofst[104]:err_code:0xa0902120, clock:0x0b729350  2006/01/31 21:29:52
ofst[108]:err_code:0xa0403034, clock:0x0b72941b  2006/01/31 21:33:15
ofst[112]:err_code:0xa0902120, clock:0x0b72941b  2006/01/31 21:33:15
ofst[116]:err_code:0xa0403034, clock:0x0b729424  2006/01/31 21:33:24
ofst[120]:err_code:0xa0902120, clock:0x0b729424  2006/01/31 21:33:24
ofst[124]:err_code:0xa0403034, clock:0x0b72942d  2006/01/31 21:33:33
ofst[  0]:err_code:0xa0403034, clock:0x0b729434  2006/01/31 21:33:40
ofst[  4]:err_code:0xa0403034, clock:0x0b729469  2006/01/31 21:34:33
ofst[  8]:err_code:0xa0902120, clock:0x0b729469  2006/01/31 21:34:33
ofst[ 12]:err_code:0xa0403034, clock:0xffffffff
ofst[ 16]:err_code:0xa0403034, clock:0x0b4886db  2005/12/31 00:01:31
[mullion]$
Press Ctrl+C to exit
>$ shutdown
shutdown
[SSM] state: 0600 -> 0000
[SSM] Error state is cleared.
(PowerOff State)
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
Press Ctrl+C to exit
>$ powerstate
[SSM] state: 0104 -> 0204
[SSM] state: 0204 -> 0105
[SSM] state: 0105 -> 0400
(PowerOn State)
[SERV NVS] READ CMD

Boot Loader SE Version 1.0.0 (Build ID: 1673,16934, Build Data: 2006-10-30_12:39:57)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV THERM] NOTIFY_MODE CMD
powerstate
ATA Power          : ON
PCI Power          : OFF
RSX Power          : ON
XDR Power          : ON
Eurus Power        : ON
SB Power           : ON
RSX Thermal Sensor : AVAILABLE
BE Thermal Sensor  : AVAILABLE
[mullion]$ [SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
Press Ctrl+C to exit
>$ shutdown
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
shutdown
[SSM] state: 0400 -> 0500
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode ... req_wake_src = 000000F4, ctxt=00/00
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0500 -> 0000
(PowerOff State)
Press Ctrl+C to exit
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
[SSM] state: 0104 -> 0204
[SSM] st
Press Ctrl+C to exit
>$ boardconfig
ate: 0204 -> 0105
[SSM] state: 0105 -> 0400
(PowerOn State)
[SERV NVS] READ CMD

Boot Loader SE Version 1.0.0 (Build ID: 1673,16934, Build Data: 2006-10-30_12:39:57)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV THERM] NOTIFY_MODE CMD
boardconfig
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ shutdown
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
[SERV NVS] WRITE CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
shutdown
[SSM] state: 0400 -> 0500
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode ... req_wake_src = 000000F4, ctxt=00/00
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0500 -> 0000
(PowerOff State)
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ bsn
bsn
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ bsn get
bsn get
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ disp_err
disp_err
CheckStop:     None
PLLUnlock:     0
RSX Int:       None
PowerSeq:      ff
[mullion]$
Press Ctrl+C to exit
>$ show
show
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ bestat
bestat
(PowerOff State)
[mullion]$
Press Ctrl+C to exit
>$ bstatus
bstatus
OK
Press Ctrl+C to exit
>$ version
version
v1.0.0_k1
[mullion]$
Press Ctrl+C to exit
>$ boardconfig
boardconfig
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ bsn
bsn
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
[SSM] state: 0104 -> 0204
[SSM
Press Ctrl+C to exit
>$ boardconfig
] state: 0204 -> 0105
[SSM] state: 0105 -> 0400
(PowerOn State)
[SERV NVS] READ CMD

Boot Loader SE Version 1.0.0 (Build ID: 1673,16934, Build Data: 2006-10-30_12:39:57)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV THERM] NOTIFY_MODE CMD
boardconfig
*** Unknown Command ***
[mullion]$ [SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
Press Ctrl+C to exit
>$ status
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
[SERV NVS] WRITE CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
status
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ bstatus
[SERV THERM] Thermal Error Detected!
[SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NVS] READ CMD
bstatus
[SERV NVS] WRITE CMD
[WMZONE] *** Thermal Shutdown (1st BE Primary ) ***
[SSM] *** Thermal Alert (ZONE) ***
[SSM] state: 0400 -> 0700
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0801200
Press Ctrl+C to exit
>$ bsn
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)
[SERV NVS] *** sending error ***
bsn
*** Unknown Command ***
[mullion]$
Press Ctrl+C to exit
>$ shutdown
shutdown
[SSM] state: 0600 -> 0000
[SSM] Error state is cleared.
(PowerOff State)
Press Ctrl+C to exit
>$
[mullion]$
Press Ctrl+C to exit
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
[SERV THERM] Thermal Error Cleared!
[SERV THERM] *** NO COMMTAG SPECIFIED! ***
Press Ctrl+C to exit
>$
[SSM] state: 0104 -> 0204
[SSM] state: 0204 -> 0105
[SSM] state: 0105 -> 0400
(PowerOn State)
[SERV NVS] READ CMD

Boot Loader SE Version 1.0.0 (Build ID: 1673,16934, Build Data: 2006-10-30_12:39:57)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV THERM] NOTIFY_MODE CMD

[mullion]$ [SERV NOTIF] CONTROL_LED
[SERV NOTIF] RING_BUZZER
[SERV NOTIF] CONTROL_LED
[SERV NVS] READ CMD
Press Ctrl+C to exit
>$ shutdown
[SERV NVS] READ CMD
[SERV NVS] READ CMD
shutdown
[SSM] state: 0400 -> 0500
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode ... req_wake_src = 000000F4, ctxt=00/00
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0500 -> 0000
(PowerOff State)
Press Ctrl+C to exit

With 3034 error, what can I test with a Multimeter to rule out other possibilites than needing to replace RSX? I'm new to this so I'd like to practice testing and learning etc.

For 2120, the Syscon Error List offers several shorts or other issues to check - but is likely a symptom of bad GPU since it concides with 3034.

CECHA01 with date of October 2006.

Warranty sticker was untouched. Inside was dirty but not terrible. Cleaned off the dried thermal paste and added new.

First set of error codes are from initial ps3toolset website visit. I likely pulled the power cord or just switched the power off resulting in the errors in Jan & Feb 2026.

The second set of error codes are after I installed CFW and was working through several system update loops, BD drive issues, and general issue with pkgs freezing/black screen when loading my game backups. The most recent errors are likely from switching the power off due to black screens as it hasn't shutdown on me and no YLOD that I have seen. Current error codes (not shown here) are all 1004.

With the one Southbridge error 2203 occurring with 1001 is there anything to specific you would check? Or, just use Dynamic fan controls and enjoy it until shutdowns begin or YLOD?

3/5/26
Error O: OxA0801004 Time: Tue, 10 Jan 2006 13:01:55 GMT
Error 1: OxA0801004 Time: Sun, 08 Jan 2006 13:12:33 GMT
Error 2: OxA0801004 Time: Sun, 08 Jan 2006 12:57:23 GMT
Error 3: OxA0801004 Time: Sat, 31 Dec 2005 00:13:57 GMT
Error 4: OxA0801001 Time: Sun, 15 Feb 2026 21:42:48 GMT
Error 5: OxA0801002 Time: Wed, 11 Feb 2026 01:07:07 GMT
Error 6: OxA0801002 Time: Mon, 12 Jan 2026 01:19:57 GMT
Error 7: OxA0801001 Time: Fri, 23 Jan 2015 23:37:00 GMT
Error 8: OxA0801004 Time: Tue, 15 Jul 2014 02:01:35 GMT
Error 9: OxA0801004 Time: Fri, 11 Jul 2014 22:54:34 GMT
Error 10: OxA0801004 Time: Thu, 10 Jul 2014 21:44:35 GMT
Error 11: OxA0801004 Time: Thu, 10 Jul 2014 21:05:59 GMT
Error 12: OxA0801004 Time: Thu, 10 Jul 2014 21:04:19 GMT
Error 13: OxA0801004 Time: Thu, 10 Jul 2014 20:38:20 GMT
Error 14: OxA0801004 Time: Sun, 19 May 2013 01:03:33 GMT
Error 15: OxA0801004 Time: Mon. 11 Mar 2013 20:36:53 GMT
Error 16: 0xA0801004 Time: Mon, 24 Dec 2012 09:05:13 GMT
Error 17: OxA0801004 Time: Fri, 08 Jun 2012 19:44:08 GMT
Error 18: OxA0801004 Time: Sat, 21 Jan 2012 22:21:53 GMT
Error 19: OxA0801004 Time: Mon, 19 Dec 2011 05:37:18 GMT
Error 20: OxA0801001 Time: Sun, 18 Dec 2011 20:33:09 GMT
Error 21: OxA0801004 Time: Sun, 09 Oct 2011 23:39:17 GMT
Error 22: 0xA0801004 Time: Thu, 01 Sep 2011 05:32:30 GMT
Error 23: OxA0801004 Time: Sat, 18 Jun 2011 18:37:10 GMT
Error 24: OxA0801004 Time: Sat, 22 Jan 2011 19:25:47 GMT
Error 25: OxA0801004 Time: Sat, 25 Dec 2010 08:27:44 GMT
Error 26: 0xA0801004 Time: Fri, 24 Dec 2010 17:28:20 GMT
Error 27: OxA0801004 Time: Thu, 23 Dec 2010 16:04:38 GMT
Error 28: OxA0801004 Time: Tue, 17 Aug 2010 19:36:04 GMT
Error 29: OxA0801001 Time: Mon, 18 Jan 2010 00:24:23 GMT
Error 30: OxA0801002 Time: Mon, 18 Jan 2010 00:23:16 GMT
Error 31: OxFFFFFFFF Time: Thu, 01 Jan 1970 00:00:00 GMT

3/16/26
N.Firmware Version: 4.92 (build 50763)
Platform ID: Cok14
Product Code: 00 84
Product Sub Code: 00 01
Hardware Config: 00000000FFFFFFFF
Syscon Firmware Version: 0B8E.0000000000000006 (EEPROM: 0000000000000006)

Bringup Count: 1441, Shutdown Count: 1367
Runtime: 338 Days, 0 Hours, 22 Minutes, 50 Seconds

Error Log
01: A0801001 Fri Jan 20 18:30:46 2006
02: A0902203 Fri Jan 20 01:44:55 2006
03: A0801001 Fri Jan 20 01:44:54 2006
04: A0801004 Tue Jan 17 23:43:59 2006
05: A0801004 Tue Jan 17 23:23:03 2006
06: A0801004 Tue Jan 17 23:04:41 2006
07: A0801004 Tue Jan 17 22:58:21 2006
08: A0801004 Tue Jan 17 22:56:20 2006
09: A0801004 Tue Jan 17 22:18:08 2006
10: A0801004 Mon Jan 16 19:25:52 2006
11: A0801004 Wed Jan 11 08:57:34 2006
12: A0801004 Wed Jan 11 03:38:47 2006
13: A0801004 Tue Jan 10 08:01:55 2006
14: A0801004 Sun Jan 8 08:12:33 2006
15: A0801004 Sun Jan 8 07:57:23 2006
16: A0801004 Fri Dec 30 19:13:57 2005
17: A0801001 Sun Feb 15 16:42:48 2026
18: A0801002 Tue Feb 10 20:07:07 2026
19: A0801002 Sun Jan 11 20:19:57 2026
20: A0801001 Fri Jan 23 18:37:00 2015
21: A0801004 Mon Jul 14 21:01:35 2014
22: A0801004 Fri Jul 11 17:54:34 2014
23: A0801004 Thu Jul 10 16:44:35 2014
24: A0801004 Thu Jul 10 16:05:59 2014
25: A0801004 Thu Jul 10 16:04:19 2014
26: A0801004 Thu Jul 10 15:38:20 2014
27: A0801004 Sat May 18 20:03:33 2013
28: A0801004 Mon Mar 11 15:36:53 2013
29: A0801004 Mon Dec 24 04:05:13 2012
30: A0801004 Fri Jun 8 14:44:08 2012
31: A0801004 Sat Jan 21 17:21:53 2012
32: FFFFFFFF Mon Dec 19 00:37:18 2011