• PS3HEN is now supporting 4.93 Firmware

    View Official Release Post for additional information HERE

HEN 2.2.2 / 2.3.X HOT FIX FOR FREEZING

DUDUŚ said:
on my ps3, when i click on "<STAR> HEN Enabler" it freezes... hen 2.3.0, webman-mod 1.47.24.1_beta installed with disabled syscall on start up. How to solve it? @DeViL303
Click to expand...
Try to place an empty txt file, called "boot_plugins.txt", on the root of an USB stick and put on PS3 before enable HEN. If this works, and you are able to enable HEN, you have an incompatible plugin.
 
jcorrea said:
Você tem algum outro plugin ou homebrew instalado, além do webman/multiMAN/Retroarch/HEN Toolbox? Em outra vez, instalei uma versão incompatível do plugin webMan, que vem junto com o PSNPatch, e toda vez que eu habilitava o HEN, o PS3 travava. Irei traduzir para o inglês.

Edit:
Do you have any other plug-ins or homebrew installed besides the webman / multiman / Retroarch / HEN Toolbox? In the past, I installed an incompatible version of the WebMan plugin, which comes along with PSNPatch, and every time I enabled HEN, the PS3 crashed. I will translate it into English.
Click to expand...
Não mano. Só tenho Multiman instalado e o iris man. Webman não tenho. Acha que poderá ser por causa de algum deles?
 
I install this toolbox but not see this on xmb
 

Attachments

  • IMG_20190627_131742.jpg
    IMG_20190627_131742.jpg
    1.2 MB · Views: 170
Prodigio73 said:
Não mano. Só tenho Multiman instalado e o iris man. Webman não tenho. Acha que poderá ser por causa de algum deles?
Click to expand...
Eu acho que pode ser relacionado a algum plugin incompatível. Você pode tentar colocar um arquivo vazio, com o nome boot_plugins.txt, em um pendrive e, tentar habilitar o HEN com o pendrive no ps3

Edit:
I think it may be related to some incompatible plugin. You can try to put an empty file, named boot_plugins.txt, on a pendrive and try to enable the HEN with the pendrive on ps3
 
jcorrea said:
Eu acho que pode ser relacionado a algum plugin incompatível. Você pode tentar colocar um arquivo vazio, com o nome boot_plugins.txt, em um pendrive e, tentar habilitar o HEN com o pendrive no ps3
Click to expand...

Fiz downgrade para 2.2.1 irmão, a unica versão que sempre me funcionou e nunca me deu nenhum freeze. Se for para rodar backups, acho que é a melhor.
 
After a few reinstall its work. But not have animated inizialing hen :(
 

Attachments

  • IMG_20190627_133340.jpg
    IMG_20190627_133340.jpg
    1.6 MB · Views: 204
@jcorrea @DeViL303 that trick with pendrive works... when i clicked "enable he": then immediately forced to launch updater... maybe low ram to do somethings?

EDIT: And i have only webman mod as plugin.
 
DUDUŚ said:
@jcorrea @DeViL303 that trick with pendrive works... when i clicked "enable he": then immediately forced to launch updater... maybe low ram to do somethings?

EDIT: And i have only webman mod as plugin.
Click to expand...
Its an issue with your webman mod then if that is the only plugin you have installed. Try reinstall webman mod, get the latest version . Then remove the usb drive and reboot, then enable HEN again. https://github.com/aldostools/webMA...47.24/webMAN_MOD_1.47.24.2_beta_Installer.pkg
toybro said:
After a few reinstall its work. But not have animated inizialing hen :(
Click to expand...
A "few reinstall" ?? One install does the same as a few. And you need to update Hen Toolbox if you want the animated enabler.
 
DUDUŚ said:
@jcorrea @DeViL303 that trick with pendrive works... when i clicked "enable he": then immediately forced to launch updater... maybe low ram to do somethings?

EDIT: And i have only webman mod as plugin.
Click to expand...
About freezing issues, it much more related to kernel panic than "low memory". It's because some plugins are not prepared to work with HEN. To be sure about what plugins you have, you can try to copy boot_plugins.txt from the root of hdd0 to a usb and check the content.
 
DUDUŚ said:
@DeViL303 @jcorrea this is not it. I mean that hen updater appear not webman updater... i tested with full and soft reboot with only new hen version and all works fine.
Click to expand...
You are a polish, write to me on priv
Translate.
Z tego co widzę jesteś polakiem to napisz mi na priv co jest dokładnie
 
Last edited:
guys, its recommended to switch browser close confirmation to OFF , there is a bug that can cause HEN enabler to freeze if its not OFF.

upload_2019-6-27_19-49-46.png


This bug mainly shows up if there is an update available, so if 2.3.0 was working ok for you, then started freezing when hen was being enabled, but only after 2.3.1 came out, then it is probably due to the browser close setting. This might be the cause of other freezes too, so turn it off to be sure.
 
Last edited:
DeViL303 said:
guys, its recommended to switch browser close confirmation to OFF , there is a bug that can cause HEN enabler to freeze if its not OFF.

View attachment 18619

This bug mainly shows up if there is an update available, so if 2.3.0 was working ok for you, then started freezing when hen was being enabled, but only after 2.3.1 came out, then it is probably due to the browser close setting. This might be the cause of other freezes too, so turn it off to be sure.
Click to expand...
Problem is 2.3.0 wasn't working for me either no 2.2.2 and there were no updates available, although I haven't tried the solution yet, I figure I probably shouldn't as I have it all working so well in 2.2.1. I will keep an eye on this and test later.
 
Prodigio73 said:
So I have just came a video on youtube that specifically stated what was happening to me, the freezing when enabling HEN.

One of the fixes that seem to be working is re-installing HEN 2.3.0 and installing HEN Toolbox, this way the HEN animation will be gone when enabling ensuring that the freezing won't happen.


Someone who's willing to test this out, be my guest.

EDIT: 2.3.1 HENTOOLBOX IS DISABLED :(

EDIT 2 & FINAL: WHEN ACTIVATING HEN remove any DVD's / Discs & USB Flash drives.

Also, check this picture and make sure to have this browser setting TURNED OFF.

o7ofri
https://prnt.sc/o7ofri
Click to expand...
toybro said:
Newsly webmanmod after install still freezing on multiman :/
Click to expand...
My freezes are done so far. I havent' got any
 
Help!! i installed v2.2.2 but ps1 and ps2 games doesnt work....do i i need to install latest version 2.3.1 ? and how to play ps1 & PS2 games on my ps3 plz i searched for a lot of tutorials but most of them arent english ..thanks for help!!
 
You must log in or register to reply here.

Similar threads

Back
Top