Hen unstable after automatic update to 3.0.3

[Fredy66]

I have the following problem.

Hen 3.0.1 runs stable, but System becomes very unstable after the automatic update to Hen 3.0.3.
(PS3 freezes very often when starting Iso games or homebrew-> Black Screen)
System: Superslim 4304a 12 GB with hard disk installed. Very last version.
HFW4.86
Homebrew: Webman Mod with Syscon as temperature control or fixed temperature. Irisman 4.87.1 or 4.88
Games: Self ripped ISOs (checked with ird)
The behavior is reproducible.
A new installation directly with Hen 3.0.3 also shows this behavior.
Back to Hen 3.0.1 stable again.

Comment: 3.0.1 is not 100% stable but much better than 3.0.3.

Maybe the different Loader (Java) is the reason for this behavior? Different memory Slot? Tested everything. Even with my second PS3 Superslim (4304a). Internal and external Hdisk checked. ISO on internal or external Drive tested.

At the moment I have to stay offline because of the automatic update.

Anyone have an Idea?

 

[atreyu187]

I would update your systems to 4.88 and then try again. Also try to rebuild the database from recovery and see what happens.

 

[Coro]

Webman Mod with Syscon as temperature control or fixed temperature.

try fixed speed instead. use "Manual" and set it to 35%.

i also recommend updating webman if you are not using the latest version.

 

[atreyu187]

try fixed speed instead. use "Manual" and set it to 35%.

i also recommend updating webman if you are not using the latest version.

Oh yeah that's right. I recall this issue with my 3001 model now that you mention it. Nice catch ;-)

 

[Coro]

Oh yeah that's right. I recall this issue with my 3001 model now that you mention it. Nice catch ;-)

i think aldo made some changes to make it less likely, but it still seems to affect some people using auto mode.

of course, one could start the game/app on manual and then change it to auto after loading completes. then change it back to manual before exiting.

 

[Fredy66]

I would update your systems to 4.88 and then try again. Also try to rebuild the database from recovery and see what happens.

Thank you for your reply. I have rebuild the database, reinstalled Hen, reinstalled everything. Always the same. 3.0.1 is stable 3.0.3 has much more problems.
I did not update to 4.88 because there is no way back.
But thank you for your help.

 

[Fredy66]

try fixed speed instead. use "Manual" and set it to 35%.

i also recommend updating webman if you are not using the latest version.

Hello Coro,
thank you for your help. Like I wrote, I tried already a fixed speed. I'm using the latest version of webman.