PS2 HWC's OSDSYS Launcher v1.1

[TnA]

Then just keep 1.965 with the updated Modules and THX for your tests!

 

[PattrickH]

Then just keep 1.965 with the updated Modules and THX for your tests!

Yeah i'm fine with that

 

[TnA]

...at least until there is a newer compatible version of it, haha

 

[jolek]

FMCB v1965 v2 + v1966 USB Modules = Works!

By v2, you mean version from 03\11\2018?
You can check it in "Changelog.txt".
It should be in the same folder where you have "FMCBInstaller.elf".

If yes, I'll try to also upload this version at FMCB Resource.

 

[PattrickH]

By v2, you mean version from 03\11\2018?
You can check it in "Changelog.txt".
It should be in the same folder where you have "FMCBInstaller.elf".

If yes, I'll try to also upload this version at FMCB Resource.

No, this one
7z MD5: f7018bae48fd5b8f86896fadb23145d6
https://www.ps2-home.com/forum/download/file.php?id=11511

Found here: https://www.ps2-home.com/forum/viewtopic.php?p=11337#p11337

 

[deba5er]

I replicated the problem and verified that the workaround (older FMCB version 1965, 12/8/2018) is fine. SCPH-90010 matrix v1.93. Set as BOOT1.ELF = OPL, BOOT2.ELF=HWC OSDSYS Launcher v1.0, BOOT3.ELF=uLaunchELF.

 

[jolek]

No, this one
7z MD5: f7018bae48fd5b8f86896fadb23145d6

I don't have an access into this site, but I notice that in changelog in official FMCB page:
https://sites.google.com/view/ysai187/home/projects/fmcbfhdb#h.p_cRxvbQL3gRRX.

There were these versions of 1.965:
Update 2018/12/08: v0.985 (FMCB v1.965) released.
Update 2018/11/03: v0.984 (FMCB v1.965) re-released.
Update 2018/10/27: v0.984 (FMCB v1.965) re-released.
Update 2018/10/21: v0.984 (FMCB v1.965) released.

While in changelog there are only:

v1.965 - 2018/11/03
    *FMCB Configurator: prevent potential crash if config file cannot be opened from device, by not closing the FD if it was not opened.
    *FMCB Configurator: Avoid accessing the HDD unit, if possible.
         Attempt to load configuration file from the device that it is booted from, before trying all other devices.
     When attempting to load USB modules, check memory cards before the HDD unit.

v1.965 - 2018/10/21
    *Updated USBD & USBHDFSD for compatibility with devices that have only one Alternate Interface configuration.
    *FMCB Configurator: fixed bug that prevented the PS2 from being switched off when there is no HDD installed.

That is why I ask about the date.
I'll try to upload FMCB from 08\12\2018 with updated USB drivers and wLe.

Thanks and best regards.

 

[PattrickH]

I don't have an access into this site, but I notice that in changelog in official FMCB page:
https://sites.google.com/view/ysai187/home/projects/fmcbfhdb#h.p_cRxvbQL3gRRX.

There were these versions of 1.965:
Update 2018/12/08: v0.985 (FMCB v1.965) released.
Update 2018/11/03: v0.984 (FMCB v1.965) re-released.
Update 2018/10/27: v0.984 (FMCB v1.965) re-released.
Update 2018/10/21: v0.984 (FMCB v1.965) released.

While in changelog there are only:

v1.965 - 2018/11/03
    *FMCB Configurator: prevent potential crash if config file cannot be opened from device, by not closing the FD if it was not opened.
    *FMCB Configurator: Avoid accessing the HDD unit, if possible.
         Attempt to load configuration file from the device that it is booted from, before trying all other devices.
     When attempting to load USB modules, check memory cards before the HDD unit.

v1.965 - 2018/10/21
    *Updated USBD & USBHDFSD for compatibility with devices that have only one Alternate Interface configuration.
    *FMCB Configurator: fixed bug that prevented the PS2 from being switched off when there is no HDD installed.

That is why I ask about the date.
I'll try to upload FMCB from 08\12\2018 with updated USB drivers and wLe.

Thanks and best regards.

Hello, is this one (2018-12-08), using USB Modules from latest version

 

[jolek]

Hello, is this one (2018-12-08), using USB Modules from latest version

Thanks, added FMCB 1.965 from 08\12\2018 and 1.953 from 16\12\2016 with wLe and USB drivers from 14\01\2019
in the "Other version (especially for modchips)" tab:
https://www.psx-place.com/resources/free-memory-card-boot-fmcb-free-harddisk-drive-boot-fhdb.712/.

 

[TnA]

Interesting!

 

[HWNJ]

Source code released to the public:
https://github.com/HowlingWolfHWC/OSDSYS-Launcher

 

[sestain]

SCPH-90004
DVD-Player: 3.11E
9D date code if I remember right

FMCB v1.8b = Works
FMCB v1965 = Black Screen when starting installer
FMCB v1966 = Black Screen when starting installer

 

[jolek]

Did you try other thumb drive?

How you managed to launch installer?
Through FreeDVDBoot?

 

[HWNJ]

SCPH-90004
DVD-Player: 3.11E
9D date code if I remember right

FMCB v1.8b = Works
FMCB v1965 = Black Screen when starting installer
FMCB v1966 = Black Screen when starting installer

Do you have a modchip installed?

 

[jolek]

Added HWC's OSDSYS Launcher into resource.

 

[sestain]

Do you have a modchip installed?

No I dont have modchip atleast I dont know about it. I used Fortuna

 

[sestain]

Did you try other thumb drive?

How you managed to launch installer?
Through FreeDVDBoot?

Did you try other thumb drive? No

How you managed to launch installer? Using UlaunchElf
Through FreeDVDBoot? Yes sometimes fortuna

 

[jolek]

Did you try other thumb drive? No

Some thumb drive(s) may be incompatible, so just try another one.

 

[sestain]

Some thumb drive(s) may be incompatible, so just try another one.

I tried other usb but it just shows random stuff on uLaunchELF but on my pc its shows everything as it should.
I don't have access to other usbs at the moment so I will test more usbs after I get them prob in 1-2 weeks

 

[jolek]

I tried other usb but it just shows random stuff on uLaunchELF but on my pc its shows everything as it should.
I don't have access to other usbs at the moment so I will test more usbs after I get them prob in 1-2 weeks

Can you define what "random stuff" means or at least give a picture from PC and PS2?