PS2 I bricked my Modbo v11 chip during an update, how to unbrick?

[M1norCharacter]

Got Modbo v11 with 1.38 firmware on my ps2 slim (7000x) and decided to update it because it was very buggy and every time tried to change something in mod chip menu but was left with not working chip at all(after putting it in standby chip started working but didn't save settings>:[ ) . Everything was successful before instalation started. I pressed start and started to update. After 10 minutes I've been dissapointed by the progres of 0, I rebooted console and now my chip is bricked I still can turn it off and enjoy clean ps2 expierience but, what to do with chip? If important I tried to update from 1.38 to 1.93

Here's how my chip and whole motherboard looks like:

And how long ussualy does it take to update a mod chip?

 

[SylverReZ]

Program this firmware onto your SPI flash. You'll need to desolder it before placing it into your programmer. A cheap SOIC8 IC clip will never work as it can short out.

This is the last officially working firmware for the Modbo V1.1 being v1.4. Later versions have anti-tamper measures.
https://github.com/m4x10187/ps2-mod...)/Modbo V1.1 - SA25F010-SA25F005 (FW 1.4).bin