PS4 I need help with print game cover

[M3X2]

I found outer cover for horizon zero dawn complete edition https://drive.google.com/drive/folders/1krBlDCXsUgOsUgb4hEckzW5D35XH4fDz but when I print photo is too big and it not suit for my ps4 case
(I using original ps4 blu-ray case) I also tried with undercoverXP but with undercover XP is too small.
There is any easy way to make that as it should be?

 

[SKEPTiCK]

So if it is game cover designed to fit behind plastic sleeve on a game case? Then adjust the paper size in the printing options until you have found the setting that retains all of the artwork across the paper you are using.

Measuring your paper may help, also you will want to use gloss paper with a laser printer to achieve the appearance that looks closest to the original paper sleeve before it was damaged or lost.

 

[Berion]

Both scans are in bad quality. You will not get nice look after printing. Anyway, it is in 3196x1889. Measure Your original covers and calculate size for target DPI. This will tell You how to print it or adjust it.

 

[Ripto]

I always use

• https://print.dvdcover.com

It's the only way I can get the right print size in my experience.
you also need A4 instead of letter or it'll run slightly short on windows.

 

[M3X2]

I always use

• https://print.dvdcover.com

It's the only way I can get the right print size in my experience.
you also need A4 instead of letter or it'll run slightly short on windows.

Width is good but still height is too small even 24mm is too small

 

[Colek]

I use IrfanView to set printing dimensions for my PS4 covers.

Width: 27.06cm
Height: 16.03cm

Fits well.