[INFO] PS3xPAD -- (A PS3 Controller Plugin (sprx) by OsirisX)

I use latest evilnat cex 4.88.2 cobra 8.3 with webmod installed

hello, I have 1 gamestop Xbox 360 wired controller,
Device Info
Device Path: /dev/bus/usb/001/002
Device Class: Vendor Specific (0xff)
Vendor ID: 0e6f
Vendor Name (reported): Performance Designed Products
Vendor Name (from DB):
Product ID: 0301
Product Name (reported): Gamepad for Xbox 360

this is the usb info on android...
i have mod the txt for add the vid and pid.. but when I connect the ps3 say= unknown USB device... any help?
 
DS4 V2 works without any mods for most games for me. I even played GTA 5 with it.
But the one game that i really need to get it to work is not working.
Gran Turismo 6.
Gamepad works in menus perfectly but than when u attempt to drive car , nothing works except start button...
So i tried this. But for the love of me i can't get it to do anything differently.

*DONE --> Modify xpad_settings.txt and change "XPAD_MODE = 0" to "XPAD_MODE = 1"
DONE-->added V2 to xpad_devices:
0x054C, 0x09CC, Sony Playstation DualShock 4, PTYPE_PS4
DONE-->Start up your PS3 with XPAD plugin loaded and connect your DS4 controller to the PS3 wirelessly like normal

At this point gamepad still works no difference since it also works without mod. I can (START+SELECT+R3) to load the plugin into the game. This also works. (Gran turismo still doesnt work here)
But then:
In the PS3 XMB, go to Settings, scroll down to Accessory Settings, select Reassign Controllers, and set the controller to port 7
When i do that , gamepad stops responding all together.

Any ideas?
 
Ok..i actually managed to pair my DS4 V2 gamepad.
Here is how.
Trick here is to actually do NOT add pid and vid of DS4 to xpad_devices, that will just prevent ds4 to work while connected to usb.

(this assumes that you already installed plugin and added your dongle (bluetooth adapter) pid and vid to xpad_devices)
example: 0x0B05, 0x17CB, Asus USB-BT400, PTYPE_BT
then , turn off console, plugin ps3 gamepad to console (via cable), plugin your bluetooth adapter to console ->turn on console
At this point your ds3 gamepad might start to rumble constantly. dont know way around that, but we wont be using it anyway after this
+your DS4 MUST NOT BE CONNECTED to console bluetooth before this! If it was, delete gamepad connection from accessories!

1. your ps3 controler is vibrating and not responding , press PS button, to connect to usb
2. press space+start+square button to open plugin mod menu
3. go to bluetooth menu you will see here waiting for connection requests
4. now on DS4 gamepad press and hold PS+Share (this is standard button combo for connecting gamepad to bluetooth)
5. your ds4 is now blinking opened to be connected to bluetooth. So, in console plugin bluetooth menu press (Pair with bluetooth device)
wait a bit. few seconds later your DS4 light will turn dark blue. If this happened you are good to go!

6. in bluetooth menu of plugin scroll to bottom and click on save this PS4 bluetooth

Done.
Disconnect your ps3 gamepad , you wont be using it any more.

Few notes tho:
DS4 will disconnect when ever you start game or exit game. Need to reconnect every time. Just press PS button.
DS4 will not have plugin support if connected with cable! Only BT will be emulated as PS3. I dont know way arround this. (If we add pid and vid gamepad will stop working on usb altogether. So i will just say that that part is broken for DS4. So do not add that.
I did this procedure couple times. On different consoles. It worked on all.
4.88 evilnat cfw.
 
Does ps3xpad work on Rebug 4.84.2 DEX? Does it need another controller aside from DualShock 3? I ask this because I only have 2 genuine DualShock 3 and I only want to use ps3xpad to remap button config but using my own DualShock 3 controller connected to internal PS3's Bluetooth adapter, no USB dongle. I read this is possible if you use native mode and this requieres DEX so that's why I'm on DEX now.

Can I use my DualShock 3 using internal Bluetooth adapter and remapp buttons config? How do I load the plugin and access VSH menu of the plugin?
 
Ok friends, I managed to make ps3xpad work but it seems I still can't use my original DS3 wirelssly. It only allows me to use it wired. It seems as if the plugin were on custom mod, not native mode. How can I enable Native Mode? I'm at 4.84.2 DEX Rebug but it seems I can't connect it wirelessly so I hope you guys can help me.

how can I switch from custom to native mode? Thanks in advance
 
I know im necroing this thread, but is there any way to improve the diagonals on the dualshock 4 sticks with this plugin? i know normally the dualshock 4's diagonals are only read as being halfway pushed and apparently the same happens with the plugin enabled. any ideas or am i just screwed until i buy something like the mayflash magic-ns (assuming that doesn't have the diagonal issue) or until i manage to find a legitimate dualshock 3?
 
arcadekidflo said:
You would be surprised how much they improve directions . If you have a fake controller these can make it decent .
Click to expand...
I think you misunderstood, I have a Dualshock 4, Which is known to not have full range of movement when it's connected to a PS3 which reads as being pushed only halfway, which doesn't happen on anything else I use the controller on. I asked for a solution related to this plugin, not something I could just buy off of amazon which probably wouldn't even be good in the first place.
 
personly i give up on this plugin. it really needs a rework and update. i luckily found refibrished geniune ps3 pad and simply never look back
 
I managed to make it work, it's great! The only thing I'd like to know is what can I do with games like Resident Evil 4.

To use native mode, I need to select controller number 7 and remap works great but Resident Evil 4 doesn't recognize it and I can't do anything.

RE Code Verónica, on the other hand, works flawlessly. It recognizes the controller (even if it's connected on the 7th port) but RE 4 can't.

Do you guys know what can I do to make it work?
 
While you can use your own custom devices, the following are supported by default as of version 0.8:
Wired Xbox 360 controller
Wired Xbox One controller
Wireless Xbox 360 controller with USB wireless adapter
Wired DualShock 4
Wireless DualShock 4 with USB wireless adapter
Click to expand...

So i understand these must not be added to the xpad_devices ? I added them and i'm getting an error at HEN init " Failed registering XPAD device VID..... PID..... "
If i have a DS4 v2 paired via the bluetooth menu on HEN , activating this plugin will not improve anything ?
If i have it wired , it won't sync :/
 
Germanloco, are you using a BT adapter with your DS4 ? Can you share your configuration ?
I also came to the conclusion that 0.8 breaks compatibility for DS4 wired . I will try with older versions .
 
You must log in or register to reply here.

Similar threads

Back
Top