PS3 PS3 BACKWARDS COK-002 ERROR 3001

T

Tim Holmes

Forum Noob
Hi all, i have a PS3 backwards compatible with the following error log

===================================
ERR 00: 00000000 A0003001 FFFFFFFF
ERR 01: 00000000 A0003001 FFFFFFFF
ERR 02: 00000000 A0003001 FFFFFFFF
ERR 03: 00000000 A0003001 FFFFFFFF
ERR 04: 00000000 A0003001 FFFFFFFF
ERR 05: 00000000 A0003001 FFFFFFFF
ERR 06: 00000000 A0003001 FFFFFFFF
ERR 07: 00000000 A0003001 FFFFFFFF
ERR 08: 00000000 A0003001 FFFFFFFF
ERR 09: 00000000 A0003001 FFFFFFFF
ERR 10: 00000000 A0003001 FFFFFFFF
ERR 11: 00000000 A0003001 FFFFFFFF
ERR 12: 00000000 A0003001 FFFFFFFF
ERR 13: 00000000 A0003001 FFFFFFFF
ERR 14: 00000000 A0003001 FFFFFFFF
ERR 15: 00000000 A0003001 FFFFFFFF
ERR 16: 00000000 A0003001 FFFFFFFF
ERR 17: 00000000 A0003001 FFFFFFFF
ERR 18: 00000000 A0003001 FFFFFFFF
ERR 19: 00000000 A0003001 FFFFFFFF
===================================

The PSU tests fine on the bench, there are no shorts on the PSU 12v power prongs, im not sure where to go or check from here, any help would be appreciated
 
You will have to check all the v12 line components involved, as per stated on the wiki:

12v Power Failure
Usually this caused by a bad Power Supply Unit (PSU).
Alternatively, a failure on the 12v_main line can cause it. Check fuses, capacitors, resistors, and IC's on the 12v line. Measure resistance of the large 2 prong 12v connector on the motherboard. It should read in the Kilo ohms range if there is sufficient separation. Otherwise you may have a short somewhere on the line.
Click to expand...
 
Hi,

Have you solved the issue?
I got CECHC03 with RSX 40nm, two errors 1001 from ERR 16 to ERR 19, ERR 00 to ERR 15 3001, resistance of the large 2 prong 12v connector on the motherboard about 5kohm.

Try also with second PSU, the same.
I think what I could its only replace nectockin on CELL to tantals
 
You must log in or register to reply here.

Similar threads

Back
Top