PS3 Ps3 bluray drive replacement

[Dark_Ungel]

I have a ps3 slim model:25xx I knew that by using the minver check and it shows 3.50 because the previous owner changed the housing and it doesn't have any stickers on it now I want to change the bd and after disassembling it I found a sticker on the laser that says KEM-450daa but after checking this website:
https://www.psdevwiki.com/ps3/Bluray_Drive
It says that there's two models of this laser will the two work on mine.
This photo for reference only:

 

[GuilloteTesla]

You can use any of the following lasers:

• KES-450A laser and KEM-450AAA slide
• KES-460A laser and KEM-450AAA slide

But if you can, it's better to get the whole BD drive and not only the laser.

 

[Dark_Ungel]

You can use any of the following lasers:

• KES-450A laser and KEM-450AAA slide
• KES-460A laser and KEM-450AAA slide

But if you can, it's better to get the whole BD drive and not only the laser.

I think you mean KEM-450DAA slide and kes450a or kes450d laser . I will get the slide locally and buy the laser from ali express

 

[GuilloteTesla]

I think you mean KEM-450DAA slide and kes450a or kes450d laser . I will get the slide locally and buy the laser from ali express

Yes, sorry, my mistake. I've copy it from the DevWiki "as is". The KEM-450DAA slide is the one used in the Slim 2500 models.

 

[Dark_Ungel]

Yes, sorry, my mistake. I've copy it from the DevWiki "as is". The KEM-450DAA slide is the one used in the Slim 2500 models.

np thanks for your help