PS3 ps3 frankenstein green led no video Fw <3.55

[reset0086]

Hello everyone and congratulations on the forum, I ran the Frankie mod on COK-002 with RSX 40, modified RES and volt regulator, the console turns on but there is no video, safe mode works but with a black screen, almost certainly the fw is lower than 3.55 and I should do a firmware update to make the RSX 40 nm work, who can help me? I have TL 866 and a CH341A

I read that I could update to 3.55 via fsm mode, but I can't get into this mode, I tried with psp 6.60 cfw with ps3 jig 1.00 application but it doesn't work, can you help me

 

[Samsensei]

i did some quicking digging around, and did you probe and check voltages?
if not this might help your specific case.
https://www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-15

Best of luck and post if this helped or not for the next guy.

 

[reset0086]

i did some quicking digging around, and did you probe and check voltages?
if not this might help your specific case.
https://www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-15

Best of luck and post if this helped or not for the next guy.

The voltages are ok, the problem is a low firmware for rsx 40 nm, I have to find a way to update to 3.55, I'm looking for a way to enter fsm mode but I can't with a psp

 

[Samsensei]

Ok that is a tough situation you are in.
And I would take the advise of a pro over mine since I don't even have all the equipment needed right now to attempt a Frankie like you. But here is what I'm thinking might be the answer.
Try and flash the hardware into thinking it is, 3.55.
https://www.psdevwiki.com/ps3/Hardware_flashing

 

[reset0086]

Ok that is a tough situation you are in.
And I would take the advise of a pro over mine since I don't even have all the equipment needed right now to attempt a Frankie like you. But here is what I'm thinking might be the answer.
Try and flash the hardware into thinking it is, 3.55.
https://www.psdevwiki.com/ps3/Hardware_flashing

I wanted to avoid doing all that process and find a doogle to enter fsm mode to update from there to 3.55