trippy2137
Forum Noob
translated from PL - EN
Hi, everyone! At the outset, I would like to greet you and describe the problem that concerns me.
Patient: PS3 Slim 320GB CECH-C2504B, uploaded CFW 4.91 Evilnat.
1) The console worked very loudly in games - like a dryer
2) I disassembled the console into its first parts
3) I replaced the paste (without separating the IHS) to see if the temperatures would improve
4) After replacing the paste, I screwed the console together
5) The console turned on and worked normally
6) After plugging in the WI-FI and BT antenna cables, the console turns on for 5 seconds after which it cuts off power, the LED goes out, you can hear a slight squeal and you have to press power twice to - the red LED lit up, then with the second click it turns on
7) After unplugging the antenna cables, the console works normally....
8) By trial and error method I connected only the black antenna without the white one - the console works normally
9) After connecting the second - white antenna, the console gives the same symptom.
That is, the problem is the antenna with the white cable. My question is, without attention plugging in the antenna cables in reverse, could there be some kind of short circuit? Why is this happening? I ordered the antennas from the disassembly and I wonder if this will do anything? Has anyone had a similar problem? Can I possibly use the console without these antennas? Will it somehow affect the functionality? Please help...
Translated with DeepL.com
Hi, everyone! At the outset, I would like to greet you and describe the problem that concerns me.
Patient: PS3 Slim 320GB CECH-C2504B, uploaded CFW 4.91 Evilnat.
1) The console worked very loudly in games - like a dryer
2) I disassembled the console into its first parts
3) I replaced the paste (without separating the IHS) to see if the temperatures would improve
4) After replacing the paste, I screwed the console together
5) The console turned on and worked normally
6) After plugging in the WI-FI and BT antenna cables, the console turns on for 5 seconds after which it cuts off power, the LED goes out, you can hear a slight squeal and you have to press power twice to - the red LED lit up, then with the second click it turns on
7) After unplugging the antenna cables, the console works normally....
8) By trial and error method I connected only the black antenna without the white one - the console works normally
9) After connecting the second - white antenna, the console gives the same symptom.
That is, the problem is the antenna with the white cable. My question is, without attention plugging in the antenna cables in reverse, could there be some kind of short circuit? Why is this happening? I ordered the antennas from the disassembly and I wonder if this will do anything? Has anyone had a similar problem? Can I possibly use the console without these antennas? Will it somehow affect the functionality? Please help...
Translated with DeepL.com
