PS3 Syscon error 3003

[Andrydon95]

Hi, I have a ps3 FAT 80 GB DIA 002 with immediate YLOD, I have already replaced all the NEC Tokin with 4 470 tantalum for each NEC. I had Syscon errors 3001 and 3003 but after jumper with tantalum I only have error 3003, what should I do?

 

[A Chinese Man]

Hi, did you fixed the 3003 error assuming it's related to CELL?

 

[Joe Robertson]

Hi, did you fixed the 3003 error assuming it's related to CELL?

3003 a pretty general error that usually leads to a CELL tokin failure but can also be a failure anywhere in the power delivery stack like a VRM or buck converter, a weak PSU may also cause this so its a total headache if you dont have a multimeter

 

[A Chinese Man]

3003 a pretty general error that usually leads to a CELL tokin failure but can also be a failure anywhere in the power delivery stack like a VRM or buck converter, a weak PSU may also cause this so its a total headache if you dont have a multimeter

Thanks for the input

I have a Frankie which produce A0901001 if I shut it down when CELL is in low temp, when it's running it's running fine.
I'm wondering if I should keep using it until the (presumably) TOKIN really goes bad.

More info
https://www.psx-place.com/threads/f...echa-with-40nm-rsx.28069/page-145#post-412705