PSP PSP region code error and 80410a0b

[_car123]

I have a psp 3004 that i used Baryon Sweeper to reinstall the firmware because it was brick and had bad blocks now when am in OFW XMB when i load psp 6.61 update it says (the region code is not correct) and also i cannot connect to a network it says error :80410a0b​

 

[GuilloteTesla]

I think that some of the PSP values and keys became corrupted during the Baryon Sweeper process.

Try using KeyCleaner to fix this issue: https://www.brewology.com/downloads/download.php?id=11625&mcid=1

If you are still getting that error, then your WiFi module is faulty or broken.

 

[_car123]

I think that some of the PSP values and keys became corrupted during the Baryon Sweeper process.

Try using KeyCleaner to fix this issue: https://www.brewology.com/downloads/download.php?id=11625&mcid=1

If you are still getting that error, then your WiFi module is faulty or broken.

I don't know if I'm doing something wrong but I can't start the app because it has the region code error.

it is on firmware:5.02 OFW when it has brick it was on OFW

and to make it Flash the firmware i did a format Lflash flash : 1
and i still have a dump of the nand when it was brick
and for some reason it doesn't have a MAC address

thank you for the help

 

[GuilloteTesla]

Check your PSP's product code, it's on a label on the battery compartment. Maybe the flash recovery process used another region code (I doubt it but could be).

Use Baryon Sweeper again in order to access the factory recovery menu, then go to NAND operations -> IDStorage tools -> Change region, and select the correct one for your PSP (check the label and this table).

Also, here is a video tutorial that uses the old Despertar del Cementerio, but shows you @1:54 how to change the region:

 

[_car123]

Check your PSP's product code, it's on a label on the battery compartment. Maybe the flash recovery process used another region code (I doubt it but could be).

Use Baryon Sweeper again in order to access the factory recovery menu, then go to NAND operations -> IDStorage tools -> Change region, and select the correct one for your PSP (check the label and this table).

Also, here is a video tutorial that uses the old Despertar del Cementerio, but shows you @1:54 how to change the region:

it doesn't have the option for IDStorage tools

to create the card that I used
JigKick-Media-Creator

 

[GuilloteTesla]

it doesn't have the option for IDStorage tools

to create the card that I used
JigKick-Media-Creator

I think you need to use Despertar del Cementerio v10 to have that missing option.

 

[_car123]

I think you need to use Despertar del Cementerio v10 to have that missing option.

I believe I have a version 10 now
I downloaded it from: github /PSP-Archive/ARK-4

it still doesn't have the option and I managed to update the system to 6.61 OFW
I still get the region code error and still don't have a MAC address

 

[opssemnik]

I believe I have a version 10 now
I downloaded it from: github /PSP-Archive/ARK-4

it still doesn't have the option and I managed to update the system to 6.61 OFW
I still get the region code error and still don't have a MAC address

I believe JigKick overrides DDC to v9

Create the card using DC-ARK Maker
https://github.com/PSP-Archive/ARK-4/wiki/DC‐ARK‐Maker

 

[_car123]

I believe JigKick overrides DDC to v9

Create the card using DC-ARK Maker
https://github.com/PSP-Archive/ARK-4/wiki/DC‐ARK‐Maker

i did that but it still doesn't have the option for IDStorage tools

I have tried reflashing the card I have tried redownloading DC‐ARK‐Maker
so many times but it still doesn't have the option for IDStorage tools.

Can I use I IDStorage tools to fix my nand through my computer from a nand backup somehow.

 

[GuilloteTesla]

Can I use I IDStorage tools to fix my nand through my computer from a nand backup somehow.

I've read somewhere that you can use a valid NAND dump in order to restore the IDStorage, but you needed a working PSP to dump it.

If you have your original dump, then you may have a chance but I've never worked on the PSP at this level.

 

[_car123]

I've read somewhere that you can use a valid NAND dump in order to restore the IDStorage, but you needed a working PSP to dump it.

If you have your original dump, then you may have a chance but I've never worked on the PSP at this level.

I believe my cousins have the exact same model of the PSP so i will do a dump of the nand

if I do that then the serial number in the MAC address will change?

 

[GuilloteTesla]

if I do that then the serial number in the MAC address will change?

As I said, I don't know how to proceed after as I've never went that far on my PSP.

 

[_car123]

As I said, I don't know how to proceed after as I've never went that far on my PSP.

Thank you I guess.

I will update when I do it.

 

[opssemnik]

Thank you I guess.

I will update when I do it.

Check if you have IDStorage options under LFlash

Edit: NVM didnt see above picture

 

[_car123]

Check if you have IDStorage options under LFlash

Edit: NVM didnt see above picture

ok

hello i have a update
I redid DC-ARK Maker this time it has the IDStorege tools opsion
but when i use it on confirmation its blank and after i press what i assume is yes it makes the error sound and the error on sreen is blank