tthousand
Moderator
What is This?
How Does it Work?
Supported Formats and Resolutions
Download and Installation
Troubleshooting
Changelog
-
This is a kernel plugin that lets you stream your PSVita screen to your computer via USB.
-
The plugin uses the SceUdcd module of the PSVita OS to setup the necessary USB descriptors to simulate and behave as an USB Video Class device (like a webcam or an USB video capture card).
The hardware color space converter of the PSVita's SoC is used to perform the conversion to the destination pixel format; then the USB controller directly performs a DMA transfer from the physical address of the resulting converted framebuffer, and therefore, saving CPU usage and power consumption.
-
- 960x544 @ 30 FPS and (less than) 60 FPS
- 896x504 @ 30 FPS and (almost) 60 FPS
- 864x488 @ 30 FPS and 60 FPS
- 480x272 @ 30 FPS and 60 FPS
- 1280x720 @ 30 FPS
-
Download:
Compilation
- vitasdk is needed.
Installation:
- Copy udcd_uvc.skprx to your PSVita
- Add udcd_uvc.skprx to taiHEN's config (ur0:/tai/config.txt or ux0:/tai/config.txt):
Code:*KERNEL ur0:tai/udcd_uvc.skprx - Reboot your PSVita.
-
If the video looks glitched, try to change the video player configuration to use the NV12 format or switch to another player (like PotPlayer or OBS). If the colors look wrong, set color range to full and color space to BT.601 (Rec. 601).
If you use Windows 10 you might have to change the Camera access permissions on the Privacy Settings.
On Linux I recommend using mplayer (mplayer tv:// -tv driver=v4l2:device=/dev/videoX:width=960:height=544).
Audio noise fix:
- Disable USB power supply (Settings > System)
Note: Remember that if anything goes wrong (like PSVita not booting) you can always press L at boot to skip plugin loading.
Note 2: No, it doesn't stream audio. For that use a 3.5mm jack to jack adapter (a ferrite bead might help reduce the electromagnetic noise).
-
v1.7
- Increase initial delay to 15s: should help fixing issues when a lot of plugins are loaded (UDCD UVC used to not work).
- Fix UVC payload size to be 12B as per UVC spec: should fix support on macOS and Android. Thanks to @xfangfang for spotting the issue!
- udcd_uvc.skprx: doesn't turn the display on/off
- udcd_uvc_oled_off.skprx: turns the display on/off on OLED Vitas (Vita 1000)
- udcd_uvc_lcd_off.skprx: turns the display on/off on LCD Vitas (Vita 2000)
v1.6
Thanks to @cuevavirus for the changes:
- Add frame descriptor for 1280x720 (with the Sharpscale plugin, the Vita is able to submit 1280x720
framebuffers to the kernel) - Dynamically allocate memory for UVC frame: allocates only as much memory as needed and only
when needed, otherwise with a 1280x720 buffer for the UVC frame, the kernel frequently runs out
of memory. - Minor code fixes
v1.5
- Removed unused interrupt endpoint, which seems that allocated USB bandwidth that could not be used for sending the video data. Before this change, sending a 960x544 NV12 frame took ~16ms (plus ~2.5 for CSC), now that this endpoint is removed and more bandwidth is available, sending a frame takes ~13ms.
Colorspace conversion takes ~2.5ms, therefore, now it takes 13+2.5 = 15.5ms to send a full frame, so 60FPS can be achieved at full resolution! - Minor cleanups
- Compiling with -O2
- udcd_uvc.skprx: doesn't turn the display on/off
- udcd_uvc_oled_off.skprx: turns the display on/off on OLED Vitas (Vita 1000)
- udcd_uvc_lcd_off.skprx: turns the display on/off on LCD Vitas (Vita 2000)
v1.4
Add OLED/LCD on/off support when connecting/disconnecting the USB (two different builds depending on OLED or LCD).
- udcd_uvc.skprx: doesn't turn the display on/off
- udcd_uvc_oled_off.skprx: turns the display on/off on OLED Vitas (Vita 1000)
- udcd_uvc_lcd_off.skprx: turns the display on/off on LCD Vitas (Vita 2000)
v1.3
- Fix System app detection thanks to @u3shit
v1.2
- Fixed 480x272 support thanks to u/Kaizu_vita
SOURCE:
https://github.com/xerpi/vita-udcd-uvc
Last edited:
