stuck on Downgrader syscon 9.99

Xeron

Member
Hi PSXplace :)))))

i have an issue with my ps3 fat ...

model : CECHL-04
QA/toggled? : No
stuck on Rogero Downgrader 3.55 syscon 9.99
BD functional but not married with the M/B
installed MLT 9.99 DGR noBD ,installed but RSOD (if possible , i need it with RSOD patch ...)

any suggestions? thanks ! :)))))
 
it's recommended not to use a downgrader especially if you did the ps3xploit hack. you should qa flag instead.
 
QA flag can't be enabled beacause no BD

i need an MLT DGR nobd noRSOD, i'm pretty sure it'll work....

any other ideas?
 
it's recommended not to use a downgrader especially if you did the ps3xploit hack. you should qa flag instead.
The reason I downgraded was because I did do the QA flag several times to makes sure it was toggled.. still corrupted data when flashing. I downgraded in hopes it would be better upgrading to rebug from a 3.55 cfw

Sent from my LG-H872 using Tapatalk
 
if you're qa flagged, try the combo over network settings. several more options should appear. that's how you'll know for sure. I'd suggest you had broken hardware, I don't believe a corruption message will appear if you have a broken bd or bt. I think those usually try to install the update but then fail.
 
The reason I downgraded was because I did do the QA flag several times to makes sure it was toggled.. still corrupted data when flashing. I downgraded in hopes it would be better upgrading to rebug from a 3.55 cfw

Sent from my LG-H872 using Tapatalk
are you on Rogero downgrader? if yes try to install Rogero 3.55 v 3.7 to dehash it ...
 
you can make a no bd version of any firmware with mfw. it's very easy to use.
tbh i tired it doesn't work for me ....a message error says unknown signal ...

Error running script: Could not unpkg file dev_flash_000.tar.aa.2016_10_24_230803 : child process exited abnormally
 
Last edited:
Back
Top