PS3 The data is corrupted (8002F225) error

[Esoterias17]

Hello to the entire community, I've been following this page for many years and I always find many solutions. But I'm in trouble XD , I recently bought a ps3 Fat CECHJ with a DIA-002 motherboard
that had a YLOD error without a hdd.

Ok, let's get to work, connect the syscon reader and get code 1002 related to nec tokin, add capacitors to the rsx and cell, and the console turned on.

Perfect I said, but it only lasted 5 seconds and again YLOD
I connected the syscon reader again but when I deleted the log the errors no longer appeared. I assumed it was a problem in the NOR or the console had an error when updating.

ok i connect the tristate to gnd and the console stays on
i made a backup with a progkeet and i ran it through the PS3 Dump Checker
it says i have 1 error in the Ros0 area, i made force patch and i checked it again and it gave me OK, i write the NOR and disconnect everything.

The console turns on and asks me to connect the controller.
it asks me for update 3.55 ok i put OFW 3.55 but, i get data is corrupted i try with everything, CFW 4.91, CFW 3.55, different flash media, usb hdd everything and it always says data is corrupted 8002f225 please who could give me a guide on what i'm doing wrong thanks..

I don't know if I can upload the dumps so they can be verified.

 

[GuilloteTesla]

You need to install OFW 3.55 using Recovery Mode.

Regarding error 8002f225, try using other USB drives, and make sure they are formated as MBR FAT32. Not all USB sticks are compatible with the PS3, you'll have to find one that works (older ones tend to work better than newer).

 

[Esoterias17]

Ok, thanks for your reply, I already tried with 3.55 OFW in recovery mode, with different USB drives, even with a PSP Fat and a 2GB Sony OEM memory and nothing, the error continues.

I think there may be something wrong with the information in the NOR, or should the console not start?
I already changed the console's HDD and formatted it in Windows but nothing, the same error

I even tried an OFW 3.44 which should give me the message that the version is old, nothing just gives me the error corrupted data 8002f225

what could it be I look forward to your answers thanks!!!

This image is from when I dumped the NOR

So after hitting force patch it stays like this with those settings

I don't know if there was something wrong in that process, after that I just wrote it and that's it.

I also forgot about the Blu-ray drive that I'm installing, it's not from the PS3, it's from another FAT. The console came without it. I don't know if that affects it. If I disconnect it, it won't pass the check, and if I connect it, the error will appear.

 

[Esoterias17]

Thanks for the help, I already fixed the PS3 , I patched the original dump with an old program and it worked in recovery mode.