PS3 Wingman Converter XE2 Trouble.

[RinMaru90]

I have the Wingman Converter XE2 for my PS3 Super Slim using PS3HEN v3.40, HFW 4.92.1.
Ive contacted support and gotten Beta drivers but i notice one issue is that the connection will sometimes be dropped or be ignored even though both controller (Daulsense v2) and XE2 are still powered on. has anyone else had this issue with this product? im sorta getting fed up with it dropping inputs every 30min or 3hrs.

 

[Algol]

Je possède aussi cet adaptateur (le XE2) que j'utilise tout autant pour ma PS3 que ma PS4.
Si je désire que la connexion se fasse entre l'adaptateur et la manette qui a été reconnue par l'interface je dois obligatoirement appuyer une seconde fois sur le bouton "PS" de la manette pour que la console réagisse à l'appuie de n'importe lequel des boutons de la manette sinon rien ne se passe.

I also have this adapter (the XE2) that I use for both my PS3 and PS4.
If I want the adapter to connect to the controller that has been recognized by the interface, I have to press the "PS" button on the controller a second time for the console to respond to any button presses on the controller, otherwise nothing happens.

 

[RinMaru90]

I have to press the "PS" button on the controller a second time for the console to respond to any button presses on the controller, otherwise nothing happens.

That's completely Normal... What's not normal is the device dropping the connection and me having to pull out the Converter and plug it back in to get any reading

 

[Algol]

That's completely Normal... What's not normal is the device dropping the connection and me having to pull out the Converter and plug it back in to get any reading

Là, je te conseille de faire "retour" chez le vendeur car il me semble que ton appareil est en panne, chez moi il ne se déconnecte jamais seul.
Here, I advise you to "return" to the seller because it seems to me that your device is broken, at mine it never disconnects by itself.

 

[RinMaru90]

I have a little experience with this and this is what I would suggest.

• • PS3HEN software conflicts (some homebrew settings might affect Bluetooth behavior).

1. Factory Reset the Wingman XE2:
   • Hold the LED buttons while plugging into a PC to enter reset mode.
   • Reinstall firmware and test again.
2. Test a Different Controller (DualShock 4, Xbox, etc.).
   • If another controller works fine, the issue may be DualSense v2 compatibility.
3. Check the Brook Gaming Support Forums or contact their support for updated firmware or compatibility fixes.

Been testing with Beta FW and i suspect PS3HEN now. hopefully EVILNAT will do better. the Customer support asked if i have been using CFW lol. Rumble no Longer hangs so that's a plus but random input drops that require a replug are still an issue.