Recent content by chrisp099

Have you tried using another hard drive? It could be some sort of key bind config error. Ive searched the error and it seems to be latency or hardware throttling related.

You can connect your pc to ps3 with ethernet cable. IPV4 settings IP Address 10.1.1.1 Subnet Mask 255.255.255.0 Defualt Router 1.1.1.0 Primary DNS 1.1.1.1 PS3 setting IP Address 10.1.1.2 Subnet Mask 255.255.255.0 Defualt Router 1.1.1.0 Primary DNS 1.1.1.1 config filezilla...

It is hard to understand what you wrote without telling us the errors/screenshots. If the vita is reporting the firmware is on the latest version you should not have any problems connecting to your pc. The only time the vita can't connect to the pc is when the vita checks online then pops up a...

I think you have two options. 1. Install henkaku. Then install update blocker and uninstall update blocker. 2. Use QCMA to reinstall the latest firmware. You might need to spoof to a higher version than latest version since the blocker is messing with the versions.

Has anyone tired to modify a CPU delid tool and use it on the ps3?

Sorry for any misunderstandings, but I didn't spend any money on this mod. I already had the pair of heatsinks in my closet collecting dust. I know the 230mm fan isn't the most efficient at moving moving the air away from the heatsinks but that's all I had laying around. The 230mm fan blows...

@sandungas I'm using a 230mm bitfenix fan. It's good enough to cool both heatsinks that's on the cell and rsx. When I try to route the pwm wire to the 230mm fan the internal fan stopped working. So i just left the og fan alone and the 230mm fan at max speed with no variable control.

Whatever you do just don't try to delid it yourself. Many have tried and failed. Its more safer and better to just put a big heatsink on it. I added a fan and now my ps3 fat is under 50 degees on full load. Do not put any extra holes in the ps3, just cut the area for the heatsink or else the ps3...

It's still better than what I did. I couldn't even delid my cell. I kinda went way too hard on it but it was a dead board for practice. But I still failed.

I'm thinking about putting an SSD in my PS3 because it freezes on me every 2 hours when I'm watching youtube. Will there be any heat benefits when using a SSD instead of a HDD.

Ok, I got it, thanks.

Since my slim is a 2000, will i need to add an xml file to state that the region is jp with the update pup in modoru to install properly?

I have a japanese ps vita slim that I want to downgrade to 3.65. Do I need to change the xml file region to JP?

i installed the vita rw found out it was causing the settings app error. i deleted vita rw and installed antiblacklist v1 and v2, this time with no settings error. Thanks all.

When I install v1 in antiblacklist I get this error. V2 installed with no side effects that I'm aware of. I went through this procedure of installing h-encore>henkaku>vitashell>enso>antiblacklist. I'm thinking about just doing it manually. Does vita rw have an option to just set vs0 to rw...