syscon

Hi guys. I need help with this ps3 slim. It's 2000 DYN board. It had errors with 12V (light was dim) and upon inspection with thermal camera i saw syscon getting warm. Afrer removing syscon the light was bright and i was able to get those 12V, so syscon was causing short. I have syscon on same...

So i got a new cok-002 board and it got a GLOD with these errors in syscon any idea on where the issue might be from or where to start ? thanks >$ AUTH Auth successful Press Ctrl+C to exit >$ eepcsum eepcsum Addr:0x000032fe should be 0x528c Addr:0x000034fe should be 0x7115 sum:0x0100...

trying to figure out YLOD on a BC PS3 I bought, have the error log. Worth fixing? I also planned to get it frankied soon. any help is greatly appreciated. errlog ofst[ 12]:err_code:0xffffffff, clock:0x0b48871b 2005/12/31 00:02:35 ofst[ 16]:err_code:0xa0801601, clock:0x0b48871b 2005/12/31...

Hey guys! I bought a broken CHECHC which supposedly stopped working after an "overheating issue". After opening it up I found out that the previous owner tried to delid it and damaged the CELLs soldermask by doing so. Reading the syscon, I get a 4401, then a 3034 error. >$ auth Auth successful...

Hello! After changing the thermal paste on my PS3 (CECH-2004a), the console wouldn't boot and would display the YLOD instead. After connecting to the SYSCON and reading the stored codes, It read 3034. If I lightly pressed down on the RSX during boot, the console booted normally so I assumed...

I have a problem with my ps3 super slim. There is no information on it in all the internet. I also asked what could it be creating threads here or asking in discord servers. Nothing, no one knows. The only alternative to give up seems to be trying out the syscon method, that one which requires...

Hey so i just got my first ps3 a fat CECHH06 and it had a issue YLOD so i went through rip felixes video tutorial on syscon and i managed to get CXR to auth and extract the error codes (which are 3034 and 4401 and 4402) so i continued and did the eep and got the 00 for internal access but when i...

Hey guys, i was messing around with fantables in my slim consoles and came to the conclusion that my fantables do not change anything to the fan behaviour. On the first console i wrote paco's fantable to 2c0 and the fan behaviour is still the same as stock. When i do r 2c0 1a it perfectly shows...

So I recently purchased a broken PS3 Fat (CECHE01) that wouldn't power on. To my surprise, it seemed to just be a faulty power supply, as there was no red power light when the console was plugged in. I also checked the 12v power rail with a multi-meter and it clearly wasn't receiving any...

Hey all! I recently got a CECHA-01 PS3 Fat that has a YLOD and am trying to revive it. I was able to get the SYSCON log, but am not sure which errors I should be looking at, which ones are most likely the problem, etc etc. I was hoping somebody would be able to help me :tears of joy: Here is my...

Hello everyone I need some help. I've been trying to get into the SW3-304 syscon for the past couple of hours. I've been following the Tutorial from Rip-Felix for Windows. I'm using a ch340G UART which I've put on 3.3V. I've also doublechecked with a multimeter. I've tried using the auth and...

Hi everyone ! I decided to create this thread after buying a PS3 (CECHP04) sold as "working" a few months ago that... ended up not working ! Of course the culprit seems to be our best friend... the YLOD ! After this (small) disappointment I decided for the very first time to open a PS3 and...

Hello. After successfully removing IHS from both RSX and CELL I tripped one of capacitors from RSX during the final cleaning. I decided to turn on the console without it. It gave out 3-beep and flashing red light 2-3 seconds after start. According to Sony it means overheating. Then I got it...

https://www.wemos.cc/en/latest/s2/s2_mini.html I'm gonna attempt to diagnose my friend's slim ps3 ( still havent got my hand on it ) and I have this board that I use to load the exFAT hax for the ps4 , would it work or do I need a separate UART adapter ?

Hi guys, i hate to open ylod thread but i can't find solution to my problem. I have FAT PS3, CECHL04 VER-001 board. It YLODs every time with delay, it eventually boots to xmb. tried to read SYSCON error log with UART but it always fail,( i tried everything: switching tx and rx wires...

Hello everyone, I'm completely new here and to repair, I'm currently learning and trying to repair a PS3 CHK01. I soldered on the points for the Syscon reader and as I was moving the unit one of the wires got caught on my drawer on my workstation and pulled the wire with the pad, I'm hoping...

'Ello, i recently watch felix video about the led diagnostics mode, thing is i did it with my ps3 and the error it gave me was 5FFF or A0805FFF (im not sure if they are difertent or something) and i couldn't find information about that error syscon code anywhere, me guess is a RSX thing cause...

Hi there, I'm new here. I'm trying to figure out what's the problem on this CECHK-04 (65nm RSX), unsealed but with without any intervention on the board. Here's the errorlog: 1A08010022D3C4A1B 2A08010022D3C4A0A 3A08010022D3C45FC 4A08010022D3C45ED 5A08010022D3C3D1F 6A08014FF2D3C31CA...

Hello! I've finally gotten around to diagnosing my dad's old cecha01 that had a ylod like 10 years ago. Because I'm not the greatest at soldering, I ended up lifting the RX pad needed to use the syscon. I scraped away at the trace and soldered the wire to it and assuming it was fine, it wasn't...

do i still need to use the webman fan setting or can i use syscon fan on a frankie i have other a01 and e01 models with the 90nm with nec tokins i use webman max 68c 35% to 32% fan they are all Delidded they run fine but fan can still be lil annoying but now put away for display now since...