VectorCorp
Forum Noob
Hi, i'm new here so please forgive me if i'm posting on wrong place, anyway i have this PS3 model CECHA00 with YLOD, the previous owner has removed the 4x NEC/TOKIN from the bottom of the board, so i replaced it with 16x 470uF 2,5v Tantalum Capacitors, but the console continue with ylod A0403034. I've already get the syscon error log below:
I've reflowed the RSX and after that i receive this error code:
Then i proceed to do a reflow on the CELL/BE and now it gives me an instant ylod this error:
Anyone have any idea what this could be? I think it could be dead CELL/BE, but i hope i'm wrong.
Code:
>$ ERRLOG GET 00
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 01
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 02
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 03
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 04
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 05
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 06
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 07
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 08
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 09
00000000 A0403034 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0A
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0B
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0C
00000000 A0091001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0D
00000000 A0093004 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0E
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 0F
00000000 A0061002 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 10
00000000 A0093004 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 11
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 12
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 13
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 14
00000000 A0093004 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 15
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 16
00000000 A0093004 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 17
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 18
00000000 A0093004 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 19
00000000 A0081001 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 1A
00000000 A0093003 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 1B
00000000 A0093003 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 1C
00000000 A0093003 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 1D
00000000 A0093003 FFFFFFFF
Press Ctrl+C to exit
>$ ERRLOG GET 1E
00000000 A0093003 FFFFFFFF
Press Ctrl+C to exit
[mullion]$ errlog
ofst[ 76]:err_code:0xffffffff, clock:0xffffffff
ofst[ 80]:err_code:0xa0093003, clock:0xffffffff
ofst[ 84]:err_code:0xa0093003, clock:0xffffffff
ofst[ 88]:err_code:0xa0093003, clock:0xffffffff
ofst[ 92]:err_code:0xa0093003, clock:0xffffffff
ofst[ 96]:err_code:0xa0093003, clock:0xffffffff
ofst[100]:err_code:0xa0081001, clock:0xffffffff
ofst[104]:err_code:0xa0093004, clock:0xffffffff
ofst[108]:err_code:0xa0081001, clock:0xffffffff
ofst[112]:err_code:0xa0093004, clock:0xffffffff
ofst[116]:err_code:0xa0081001, clock:0xffffffff
ofst[120]:err_code:0xa0093004, clock:0xffffffff
ofst[124]:err_code:0xa0081001, clock:0xffffffff
ofst[ 0]:err_code:0xa0081001, clock:0xffffffff
ofst[ 4]:err_code:0xa0081001, clock:0xffffffff
ofst[ 8]:err_code:0xa0093004, clock:0xffffffff
ofst[ 12]:err_code:0xa0061002, clock:0xffffffff
ofst[ 16]:err_code:0xa0081001, clock:0xffffffff
ofst[ 20]:err_code:0xa0093004, clock:0xffffffff
ofst[ 24]:err_code:0xa0091001, clock:0xffffffff
ofst[ 28]:err_code:0xa0081001, clock:0xffffffff
ofst[ 32]:err_code:0xa0081001, clock:0xffffffff
ofst[ 36]:err_code:0xa0403034, clock:0xffffffff
ofst[ 40]:err_code:0xa0403034, clock:0xffffffff
ofst[ 44]:err_code:0xa0403034, clock:0xffffffff
ofst[ 48]:err_code:0xa0403034, clock:0xffffffff
ofst[ 52]:err_code:0xa0403034, clock:0xffffffff
ofst[ 56]:err_code:0xa0403034, clock:0xffffffff
ofst[ 60]:err_code:0xa0403034, clock:0xffffffff
ofst[ 64]:err_code:0xa0403034, clock:0xffffffff
ofst[ 68]:err_code:0xa0403034, clock:0xffffffff
ofst[ 72]:err_code:0xa0403034, clock:0xffffffff
[mullion]$
Code:
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] First Boot.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
Press Ctrl+C to exit
>$ becount
[POWERSEQ] Error : BitTraining RSX:RRAC:RX3:GLOBAL1:RX_STATUS
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0403034
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)
becount
Bringup : 2721 times
Shutdown: 2431 times
Power-on: 128day 20hour 51min 16sec
[mullion]$
Press Ctrl+C to exitI've reflowed the RSX and after that i receive this error code:
Code:
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x20e2
Press Ctrl+C to exit
>$
[POWERSEQ] Error : BitTraining BE:RRAC:RX1:GLOBAL1:RX_STATUS
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0403034
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)Then i proceed to do a reflow on the CELL/BE and now it gives me an instant ylod this error:
Code:
>$ bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] First Boot.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0302
[SSM] PowSeq Fail : Detected !
[SSM] state: 0302 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0213013
Press Ctrl+C to exit
>$
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)Anyone have any idea what this could be? I think it could be dead CELL/BE, but i hope i'm wrong.
