ylod

Hey guys, having a problem with a CECHB console Took it to 2 local repair guys, they claim power rail itself is good and that either rsx is causing short or scratched cell after delid, though previous owner told me it worked fine like that with solder mask on the scratch Anyway scratched CELL...

RIP Felix

RIP Felix

i know they can have bga failures and all that but can they get a yellow light? i was splicing toghether a 4pin connector for a 3000 model and after i was done i put it in the console after making sure everything was propperly connected and it turned red in standby so i clicked the power button...

Hello, some time ago I have a ps3 slim CECH2001A, It had never suffered from overheating or anything, but one day while I was playing there was a power outage in my house and after that my console only shows YLOD, I do not think it is a matter of reballing because as I say never suffered from...

I got a ps3 phat that got a ylod after not being use dor about 5 years. I remember that it worked last time i used it, i think i put discs there by accident but i dont feel any thing in the drive. I tried cleaning it, booting it without disc drive and/or hard drive It has the green light and...

Good morning. I picked up an A01 recently for cheap that has YLOD and after sysconning it I found it was full of exclusively 1001 codes. I took that as the CPU tokins had failed, and replaced them with tantalizers. Trying to boot now, the system stays on but is unresponsive, only displaying the...

last night i went to play some dishonored on the ps3 and i noticed the fan speed stayed at 20% the entire time while the rsx and cell were getting hotter and hotter i figrued this was normal but i started to get concerned when the cell hit about 65C (150 degress) and went to turn it off but it...

Hey all, I have been happily using my ps3 CECHH01 on my CRT for about a year now with absolutely zero issues. Only problem was, I could only have 3 games at once because I have the smallest storage model. So yesterday I finally decided to upgrade it to a 500gb SSD. The process was pure torture...

So I watched @RIP-Felix video on the YLOD and I now recently got three Frankies, CECHE01 (40nm), CECHC03 (65nm) and a CECHA00 (40nm). In his video he said that you cannot downgrade lower than 3.55 on the 40nm models. However, is there any way to modify the RSX or something in order to...

Hey, so long story short, i'm currently in college doing a engineering degree, i'm at the half of my second of 5 years, and decided to practice a lot of stuff on old consoles, so far i've maneged to resucite a ps1 and a ps2, so, i decided to go for the shot and try the ps3 (bad idea). I found...

Hi, i'm new here so please forgive me if i'm posting on wrong place, anyway i have this PS3 model CECHA00 with YLOD, the previous owner has removed the 4x NEC/TOKIN from the bottom of the board, so i replaced it with 16x 470uF 2,5v Tantalum Capacitors, but the console continue with ylod...

So I recently purchased a broken PS3 Fat (CECHE01) that wouldn't power on. To my surprise, it seemed to just be a faulty power supply, as there was no red power light when the console was plugged in. I also checked the 12v power rail with a multi-meter and it clearly wasn't receiving any...

Hi everyone ! I decided to create this thread after buying a PS3 (CECHP04) sold as "working" a few months ago that... ended up not working ! Of course the culprit seems to be our best friend... the YLOD ! After this (small) disappointment I decided for the very first time to open a PS3 and...

Came across this, thought someone should post the archived link in case they don't know how to look it up manually (link is shortened for convenience of remembering and points to archive.org): https://is.gd/ps3phatcooling For the paranoid...

So I have a PS3 FAT with a YLoD but the HDD is still fully functioning and i have the eid_root_key, is it possible to transfer all of the data over to a new HDD? or does it not work this way?

hy to yall. i'm the possessor of a cechg ps3 fat, the works that i have done are these: removed 1 nec tokin from both cell and rsx because it was giving me the 1001 and 1002 error. delidded and repasted to make it be the cooler it can get installed hen 4.91.2 installed webman mod with the auto...

Did everything necessary to enter internal mode on the syscon. Here’s a copy of the log. Obviously I need a RSX But I don’t understand why it’s not giving a date or time with the error log. The CMOS battery is plugged in. Console only has 7 days of runtime...

Hello everyone, This is my first post on this site as I was told that it is the place to ask about everything PS3 related. I have recently bought 3 used PS3s. 1 slim Black CECH2100 and 2 fats CECHH Ceramic white and CECHL Satin Silver. The reason for buying the fats is I really liked the white...

Hello, first time posting on psx-place. Ps: sorry in advance about any mistakes over my english writing skills, english is not my native language, and i'm trying not to use translator anymore. The thread: I've seen alot of posts and videos over this comunity before i bought a PS3 myself. The...