PS3 CECHBCannot shut down normally after a heavy fall, but can shut down after preheating

CECHA

Member
My CECHB beeps when it shuts down after a heavy fall, but there is no Ylod or even error log. After my test, it beeps and flashes red light when it shuts down within 2 minutes and 30 seconds. But after the machine gets hot, it can shut down normally without any problems. I replaced the PSU and the power The problem is not solved
 
Check HDD's S.M.A.R.T but also make surface scan. High probably, it is damaged which those tests will reveal.

It is not source of Your problems, just reminder that mechanic storage almost always gets serious damages (like eg. head(s) scratched plate(s)) if fall during work.

What syscon errors has been registered?
 
Check HDD's S.M.A.R.T but also make surface scan. High probably, it is damaged which those tests will reveal.

It is not source of Your problems, just reminder that mechanic storage almost always gets serious damages (like eg. head(s) scratched plate(s)) if fall during work.

What syscon errors has been registered?

I replaced the ssd with a new one but the problem was not solved, syscon did not generate errors, it would beep red when turned on and off immediately, but it would shut down normally after warming up, as if the capacitor needed to be heated. This cechb was damaged during transportation
 
Last edited by a moderator:

Similar threads

Back
Top