Hey everyone, ran into a GLOD system earlier today, Syscon codes are pretty much useless but they're here anyway, I also checked diagnostic output from the SB, and from what I see the system just, boots, no complaints, but I have no video output from either AV or HDMI. I inserted both logs, if anybody with advanced knowledge on the PS3 can help me out that would be great. If it is just a bad RSX, I recently got the equipment together, and learned how to swap GPUs on xbox 360, getting a JTAGable falcon running again, so an RSX swap is no issue to me, I just need to know it needs to be done.
Code:
Boot Loader SE Version 4.4.0 (Build ID: 5012,49722, Build Date: 2013-03-14_23:53:31)
SDK Version: 440.000
Copyright(C) 2013 Sony Computer Entertainment Inc.All Rights Reserved.
[INFO]: === eXtreme Data Rate Memory Subsystem ===
[INFO]: (Configured Memory Size per single XIO channel: 128 MBytes.)
[INFO]: XIO channel[0] is available.
[INFO]: XIO channel[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 11101111
[INFO]: BE:3.2, SB:PX1.1
Device: PATAC0:Cable Not Connect
Cell OS SDK4.4.0 000 (release build: r49722 2013_03_14_223000)
Copyright 2013 Sony Computer Entertainment Inc.
revision: 49423
date: Thu Mar 14 23:56:50 JST 2013
skip 2nd initialization step
lv2(0): total memory size: 249MB+640KB
lv2(0): kern memory size: 12MB+640KB (heap:3524KB page pool:4736KB)
lv2(0): user memory size: 237MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 4.4.0
lv2(2): Copyright 2011 Sony Computer Entertainment Inc.
lv2(2): All Rights Reserved.
lv2(2):
lv2(2): revision: 49722
lv2(2): build date: 2013/03/15 00:04:17
lv2(2): processor: Broadband Engine Ver 0x0000 Rev 0x0202
lv2(2): PPU:0, Thread:0 is enabled.
lv2(2): PPU:0, Thread:1 is enabled.
lv2(2): rsx: b02 500/650 vpe:ff shd:5f [4K0349001:1:3:10:7:7:4:f:1][39:2:1:1:1:3:1][0:0:0]
lv2(2): Available physical SPUs: 6/7
lv2(2): mounting the flash file system : OK
lv2(2):
lv2(2): ###
lv2(2): ### Software update mode
lv2(2): ###
lv2(2):
lv2(2): mounting the builtin HDD1 : OK
lv2(2): creating the initial system process : OK
Code:
ofst[ 0]:err_code:0xa0801701, clock:0x0f67209d 2008/03/09 22:26:37
ofst[ 4]:err_code:0xa0801601, clock:0x0f67209d 2008/03/09 22:26:37
ofst[ 8]:err_code:0xa0802203, clock:0x1548e3d3 2011/04/26 02:00:51
ofst[ 12]:err_code:0xa0801004, clock:0x1779e4c1 2012/06/24 14:46:25
Bringup : 2773 times
Shutdown: 2329 times
Power-on: 216day 21hour 13min 35sec
