MyNameIsDiEgo
Member
First of all, my system is jailbroken. And was running a no BD version of ferrox
Both of these errors have multiple meanings, 8002f14e is supposed to be a bad bd drive board, or a broken bd drive cable or even a bad hdd and 8002f1f9 is supposed to be an error for a broken bluetooth/wifi module. But again, there could be more. So long story short, I was trying to put a bd drive from a broken system I have on mine since the one I have on mine is not working, so I switched the little boards and put my broken bd drive's board on the working drive, put the drive on the ps3, and It was of course no working. I then heard about remmarying the drive, and it was going well, until I had to install the standard ferrox version (the one that isnt no bd or no bt) so I could finally use my bd drive. While I was doing the update I was getting error 8002f14e at about 98% . I tried cleaning the bd drive ribbon cable, and I even the one from my dead system, and I even broke the little hinge that claps in there and holds the cable in place. I managed to use the broken piece to put it back and it held there just like it used to. But again, I was getting error 8002f14e. Also the blue light was solid blue, and pressing the eject button made the drive make some noise. So I dont think it could be broken but idk. I then decided to change the hdd, since this was another reason error 8002f14e occured for some people , but it didnt do anyhing. At last, I completey removed the bd drive, and now im getting error 8002f1f9. And this error is supposed to be for a bad bluetooth/ wifi module, but heres the weirdest thing, im currently trying to use a no bd + no bt version of the cfw, so the module and the bd drive shouldnt affect the installation in any way. So basically my system went from working ok to completely useless. I have tried installing normal 4.88 and many other versions of the cfw. But nothing. Please help
Both of these errors have multiple meanings, 8002f14e is supposed to be a bad bd drive board, or a broken bd drive cable or even a bad hdd and 8002f1f9 is supposed to be an error for a broken bluetooth/wifi module. But again, there could be more. So long story short, I was trying to put a bd drive from a broken system I have on mine since the one I have on mine is not working, so I switched the little boards and put my broken bd drive's board on the working drive, put the drive on the ps3, and It was of course no working. I then heard about remmarying the drive, and it was going well, until I had to install the standard ferrox version (the one that isnt no bd or no bt) so I could finally use my bd drive. While I was doing the update I was getting error 8002f14e at about 98% . I tried cleaning the bd drive ribbon cable, and I even the one from my dead system, and I even broke the little hinge that claps in there and holds the cable in place. I managed to use the broken piece to put it back and it held there just like it used to. But again, I was getting error 8002f14e. Also the blue light was solid blue, and pressing the eject button made the drive make some noise. So I dont think it could be broken but idk. I then decided to change the hdd, since this was another reason error 8002f14e occured for some people , but it didnt do anyhing. At last, I completey removed the bd drive, and now im getting error 8002f1f9. And this error is supposed to be for a bad bluetooth/ wifi module, but heres the weirdest thing, im currently trying to use a no bd + no bt version of the cfw, so the module and the bd drive shouldnt affect the installation in any way. So basically my system went from working ok to completely useless. I have tried installing normal 4.88 and many other versions of the cfw. But nothing. Please help
